| HS_Code | English Name 英文品名 | Chinese Name 中文品名 | MFN 特惠税率 |
| 0106900010 | ---Fit for human consumption | ---适合供人食用的 | 0 |
| 0106900019 | ---Other | ---其他 | 0 |
| 0106900090 | --Other | --其他 | 0 |
| 0302910096 | ----Hard fish roes, for processing | ----加工用硬鱼鱼卵 | 10 |
| 0303398580 | ----Flatfish (Limanda aspera, Lepidopsetta bilineata, Pleuronectes quadrituberculatus, Limanda ferruginea, Lepidopsetta polyxystra), for processing | ----加工用比目鱼 | 15 |
| 0303541095 | -----Whole, for processing | -----整体，用于处理 | 20 |
| 0303541099 | -----Other | -----其他 | 20 |
| 0303811510 | ----Piked dogfish (Squalus acanthias), whole, for processing | ----狗鱼（角鲨），整条，加工用 | 6 |
| 0303811590 | ----Other | ----其他 | 6 |
| 0303919096 | -----Hard fish roes, for processing | -----加工用硬鱼鱼卵 | 10 |
| 0304810020 | ---Of the species Oncorhynchus nerka (sockeye salmon (red salmon)), Oncorhynchus kisutch, Oncorhynchus keta and Oncorhynchus tschawytscha, for processing | ---大马哈鱼（红三文鱼）的种类，大马哈鱼，大马哈鱼和大马哈鱼，用于加工 | 2 |
| 0304881110 | -----Piked dogfish (Squalus acanthias) for processing | -----加工用刺狗鱼 | 7.5 |
| 0304881190 | -----Other | -----其他 | 7.5 |
| 0304894929 | -------Other | -------其他 | 15 |
| 0304961010 | ----Piked dogfish (Squalus acanthias) for processing | ----加工用刺狗鱼 | 7.5 |
| 0304961090 | ----Other | ----其他 | 7.5 |
| 0304999912 | --------Of Scomber japonicus, for processing | --------刺参，用于加工 | 7.5 |
| 0304999918 | --------Other | --------其他 | 7.5 |
| 0305200041 | ------Hard fish roes, salted or in brine, for processing | ------加工用盐腌或盐水腌硬鱼鱼卵 | 11 |
| 0305200049 | ------Other | ------其他 | 11 |
| 0308308010 | ---Live, fresh or chilled | ---活、鲜或冷的 | 11 |
| 0308308090 | ---Other | ---其他 | 11 |
| 0508001000 | -Red coral (Corallium rubrum) | -红珊瑚 | 0 |
| 0508009010 | --Empty shells for food use and use as raw material for glucosamine | --食品用空壳和葡萄糖胺的原料 | 0 |
| 0508009020 | --Shells containing soft tissue and flesh used for different purposes covered under Article 10(k)(i) of Regulation (EC) No 1069/2009 | --包含用于第1069/2009号法规（ec）第10（k）（i）条所述不同用途的软组织和肉的壳 | 0 |
| 0508009090 | --Other | --其他 | 0 |
| 0710400091 | ---in cobs with a diameter of 8|mm or more, but not more than 12|mm | ---直径为8 | mm或以上，但不超过12 | mm的木棒 | 5.1 % + 9.4 EUR/100 kg/net eda |
| 0710400099 | ---Other | ---其他 | 5.1 % + 9.4 EUR/100 kg/net eda |
| 0808108020 | ---Of the variety Fuji | ---富士的品种 | EP |
| 1604129916 | ------Preserved in barrels of at least 70 kg net drained weight, for processing | ------保存在净重至少为70kg的桶中，用于加工 | 20 |
| 1604129918 | ------Other | ------其他 | 20 |
| 1605100031 | ---Other | ---其他 | 8 |
| 1605100096 | ---Other | ---其他 | 8 |
| 2001903091 | ----in cobs with a diameter of 8|mm or more, but not more than 12|mm | ----直径为8 | mm或以上，但不超过12 | mm的木棒 | 5.1 % + 9.4 EUR/100 kg/net eda |
| 2001903099 | ----Other | ----其他 | 5.1 % + 9.4 EUR/100 kg/net eda |
| 2005800091 | ---in cobs with a diameter of 8 mm or more, but not more than 12 mm | ---直径为8毫米或以上，但不超过12毫米的木棒 | 5.1 % + 9.4 EUR/100 kg/net eda |
| 2005800099 | ---Other | ---其他 | 5.1 % + 9.4 EUR/100 kg/net eda |
| 2710122110 | ------Containing ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union) | ------含农产品生产的乙醇（如《欧盟运作条约》附件一所列） | 4.7 |
| 2710122190 | ------Other | ------其他 | 4.7 |
| 2710122510 | ------Containing ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union) | ------含农产品生产的乙醇（如《欧盟运作条约》附件一所列） | 4.7 |
| 2710122590 | ------Other | ------其他 | 4.7 |
| 2710123110 | -------Containing ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union) | -------含农产品生产的乙醇（如《欧盟运作条约》附件一所列） | 4.7 |
| 2710123190 | -------Other | -------其他 | 4.7 |
| 2710124110 | ---------Containing ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union) | ---------含农产品生产的乙醇（如《欧盟运作条约》附件一所列） | 4.7 |
| 2710124190 | ---------Other | ---------其他 | 4.7 |
| 2710124510 | ---------Containing ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union) | ---------含农产品生产的乙醇（如《欧盟运作条约》附件一所列） | 4.7 |
| 2710124590 | ---------Other | ---------其他 | 4.7 |
| 2710124910 | ---------Containing ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union) | ---------含农产品生产的乙醇（如《欧盟运作条约》附件一所列） | 4.7 |
| 2710124990 | ---------Other | ---------其他 | 4.7 |
| 2710125010 | --------Containing ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union) | --------含农产品生产的乙醇（如《欧盟运作条约》附件一所列） | 4.7 |
| 2710125090 | --------Other | --------其他 | 4.7 |
| 2710127010 | ------Containing ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union) | ------含农产品生产的乙醇（如《欧盟运作条约》附件一所列） | 4.7 |
| 2710127090 | ------Other | ------其他 | 4.7 |
| 2710129010 | ------Containing ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union) | ------含农产品生产的乙醇（如《欧盟运作条约》附件一所列） | 4.7 |
| 2710129090 | ------Other | ------其他 | 4.7 |
| 2804701000 | --Red phosphorus | --红磷 | 5.5 |
| 2804709000 | --Other | --其他 | 5.5 |
| 2811198050 | ----Sulphamidic acid (CAS RN 5329-14-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of the anti-caking agent silicon dioxide (CAS RN 112926-00-8) | ----按重量计纯度为95%或以上的磺胺酸，不论是否添加不超过5%的防结块剂二氧化硅 | 5.3 |
| 2825200010 | --Lithium hydroxide monohydrate (CAS RN 1310-66-3) | --一水氢氧化锂 | 5.3 |
| 2825200090 | --Other | --其他 | 5.3 |
| 2841500011 | ---Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more | ---重量纯度大于等于99%的重铬酸钾 | 5.5 |
| 2841500013 | ---Other | ---其他 | 5.5 |
| 2850002080 | --Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more | --体积纯度为99999%或以上的砷化氢 | 4.6 |
| 2903391940 | -----3-(Bromomethyl)pentane (CAS RN 3814-34-4) with a purity by weight of 99 % or more | -----重量纯度大于等于99%的3-（溴甲基）戊烷 | 5.5 |
| 2903720010 | ---Dichloro-1,1,1-trifluoroethane (CAS RN 306-83-2) with a purity by weight of 99 % or more | ---重量纯度大于等于99%的二氯-1,1,1-三氟乙烷 | 5.5 |
| 2903720090 | ---Other | ---其他 | 5.5 |
| 2903793030 | ----1-Bromo-5-chloropentane (CAS RN 54512-75-3) with a purity by weight of 99 % or more | ----重量纯度大于等于99%的1-溴-5-氯戊烷 | 5.5 |
| 2903898045 | ----1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.1⁶,⁹.0²,¹³.0⁵,¹⁰]octadeca-7,15-diene (CAS RN 13560-89-9) with a purity by weight of 99 % or more | ----重量纯度大于等于99%的1,6,7,8,9,14,15,16,17,17,18,18-十二氯五环[12.2.1.1⁶，⁹.0²，¹³.0⁵，¹⁰]十八碳-7,15-二烯 | 5.5 |
| 2903998025 | ----2,2'-Dibromobiphenyl (CAS RN 13029-09-9) with a purity by weight of 95 % or more | ----重量纯度大于等于95%的2,2'-二溴联苯 | 5.5 |
| 2903998035 | ----2-Bromo-9,9'-spirobi[9H-fluoren] (CAS RN 171408-76-7) with a purity by weight of 95 % or more | ----纯度（按重量计）为95%或以上的2-溴-9,9'-螺环[9h-芴]（cas rn 171408-76-7） | 5.5 |
| 2904990055 | ---2,4-dichloro-1,3-dinitro-5-(trifluoromethyl)benzene (CAS RN 29091-09-6) with a purity by weight of 96 % or more | ---重量纯度大于等于96%的2,4-二氯-1,3-二硝基-5-（三氟甲基）苯 | 5.5 |
| 2905310010 | ---Mono ethylene glycol (current EC-number 203-473-3) | ---单乙二醇（当前ec号203-473-3） | 5.5 |
| 2905310090 | ---Other | ---其他 | 5.5 |
| 2905399570 | ----2-methylpropane-1,3-diol (CAS RN 2163-42-0) with a purity by weight of 98 % or more | ----重量纯度大于等于98%的2-甲基丙烷-1,3-二醇 | 5.5 |
| 2906290070 | ---1,2,3,4-Tetrahydro-1-naphthol (CAS RN 529-33-9) with a purity by weight of 95 % or more | ---1,2,3,4-四氢-1-萘酚，重量纯度大于等于95% | 5.5 |
| 2909191010 | ----Containing ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union) | ----含农产品生产的乙醇（如《欧盟运作条约》附件一所列） | 5.5 |
| 2909191090 | ----Other | ----其他 | 5.5 |
| 2909303850 | ----2-(1-Adamantyl)-4-Bromoanisole (CAS RN 104224-63-7) with a purity by weight of 99 % or more | ----重量纯度大于等于99%的2-（1-金刚基）-4-溴代苯胺 | 5.5 |
| 2909500040 | --2-methoxy-4-(trifluoromethoxy)phenol (CAS RN 166312-49-8) with a purity by weight of 98 % or more | --重量纯度大于等于98%的2-甲氧基-4-（三氟甲氧基）苯酚 | 5.5 |
| 2909600050 | --Solution of 3,6,9-(ethyl and/or propyl)-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonanes (CAS RN 1613243-54-1) in mineral spirits (CAS RN 1174522-09-8), containing by weight 25 % or more, but not more than 41 % of the hexoxonanes | --3,6,9-（乙基和/或丙基）-3,6,9-三甲基-1,2,4,5,7,8-己酮在矿油精（cas rn 1174522-09-8）中的溶液，按重量计含有25%或更多但不超过41%的己酮 | 5.5 |
| 2914290035 | ---4-(trans-4-Propylcyclohexyl)cyclohexanone (CAS RN 82832-73-3) with a purity by weight of 95 % or more | ---重量纯度大于等于95%的4-（反-4-丙基环己基）环己酮 | 5.5 |
| 2914500015 | --1,1-dimethoxyacetone (CAS RN 6342-56-9) with a purity by weight of 98 % or more | --重量纯度大于等于98%的1,1-二甲氧基丙酮 | 5.5 |
| 2915240010 | ---Acetic anhydride (CAS RN 108-24-7) with a purity by weight of 97 % or more | ---重量纯度大于等于97%的醋酸酐 | 5.5 |
| 2915240090 | ---Other | ---其他 | 5.5 |
| 2915400010 | --Ethyl trichloroacetate (CAS RN 515-84-4) with a purity by weight of 98 % or more | --重量纯度大于等于98%的三氯乙酸乙酯 | 5.5 |
| 2915400020 | --Sodium trichloroacetate (CAS RN 650-51-1) with a purity by weight of 96 % or more | --重量纯度大于等于96%的三氯乙酸钠 | 5.5 |
| 2915400090 | --Other | --其他 | 5.5 |
| 2915907018 | ---Myristic acid, lithium salt (CAS RN 20336-96-3) with a purity by weight of 95 % or more | ---重量纯度大于等于95%的肉豆蔻酸锂盐 | 5.5 |
| 2916199560 | ----Methyl 2-fluoroprop-2-enoate (CAS RN 2343-89-7) with a purity by weight of 93 % or more, whether or not with not more than 7 % of the stabiliser 2,6-di-tert-butyl-p-cresol (CAS RN 128-37-0) and Tetrabutylammonium nitrite (CAS RN 26501-54-2) | ----重量纯度为93%或以上的2-氟丙-2-烯酸甲酯，不论是否含有不超过7%的稳定剂2,6-二叔丁基对甲酚（cas rn 128-37-0）和亚硝酸四丁胺（cas rn 26501-54-2） | 6.5 |
| 2916199570 | ----Methyl 3-methyl-2-butenoate (CAS RN 924-50-5) with a purity by weight of 99,0 % or more | ----重量纯度大于等于99.0%的3-甲基-2-丁烯酸甲酯 | 6.5 |
| 2916200025 | --Cyclohexanecarbonyl chloride (CAS RN 2719-27-9) with a purity by weight of 99 % or more | --重量纯度大于等于99%的环己烷酰氯 | 6.5 |
| 2916200035 | --2-Cyclopropylacetic acid (CAS RN 5239-82-7) with a purity by weight of 95 % or more | --重量纯度大于等于95%的2-环丙基乙酸 | 6.5 |
| 2916399016 | ----3-Fluoro-5-iodo-4-methylbenzoic acid (CAS RN 861905-94-4) with a purity by weight of 97 % or more | ----重量纯度大于等于97%的3-氟-5-碘-4-甲基苯甲酸 | 6.5 |
| 2916399022 | ----6-bromo-2-fluoro-3-(trifluoromethyl)benzoic acid (CAS RN 1026962-68-4) with a purity by weight of 95 % or more | ----重量纯度大于等于95%的6-溴-2-氟-3-（三氟甲基）苯甲酸 | 6.5 |
| 2916399027 | ----Methyl 6-Bromo-2-naphthoate (CAS RN 33626-98-1) with a purity by weight of 99 % or more | ----重量纯度大于等于99%的6-溴-2-萘甲酸甲酯 | 6.5 |
| 2917198045 | ----Iron fumarate (CAS RN 141-01-5) with a purity by weight of 93 % or more | ----重量纯度大于等于93%的富马酸铁 | 6.3 |
| 2918199850 | ----12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) with a purity by weight of 90 % or more for use in the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters | ----用于制造聚甘油-聚-12-羟基十八酸酯的重量纯度为90%或以上的12-羟基十八酸 | 6.5 |
| 2918290040 | ---3-Hydroxy-4-nitrobenzoic acid (CAS RN 619-14-7) with a purity by weight of more than 96,5 % | ---重量纯度大于96.5%的3-羟基-4-硝基苯甲酸 | 6.5 |
| 2918300035 | --3-Oxocyclobutane-1-carboxylic acid with a purity by weight of 98 % or more (CAS RN 23761-23-1) | --重量纯度大于等于98%的3-氧代环丁烷-1-羧酸 | 6.5 |
| 2918999043 | ----Vanillic acid (CAS RN 121-34-6) with a purity by weight of 98,5 % or more | ----重量纯度为98.5%或以上的香草醛酸 | 6.5 |
| 2919900035 | --2,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2) with a purity by weight of 95 % or more, with particles greater than 100µm used in the manufacture of nucleating agents with a particle size (D90) no greater than 35 µm as measured by a light scattering technique | --2,2'-亚甲基双（4,6-二叔丁基苯基）磷酸酯，单钠盐（cas rn 85209-91-2），按重量计纯度为95%或以上，颗粒大于100µm，用于制造用光散射技术测量的粒径（d90）不大于35µm的成核剂 | 6.5 |
| 2920290080 | ---2,4,8,10-tetrakis(1,1-dimethylethyl)-6-(2-ethylhexyloxy)-12H dibenzo[d,g][1,3,2]dioxaphosphocin (CAS RN 126050-54-2) with a purity by weight of 95 % or more | ---2,4,8,10-四（1,1-二甲基乙基）-6-（2-乙基己氧基）-12h-二苯并[d，g][1,3,2]二氧磷杂环素（cas rn 126050-54-2），按重量计纯度大于等于95% | 6.5 |
| 2920901075 | ---Dimethyl Sulphate (CAS RN 77-78-1) with a purity of at least 99 % | ---纯度至少为99%的硫酸二甲酯 | 6.5 |
| 2921290070 | ---N,N,N',N'-tetramethylethylenediamine (CAS RN 110-18-9) with a purity by weight of 99 % or more | ---n、 重量纯度大于等于99%的n，n'，n'-四甲基乙二胺 | 6 |
| 2921430080 | ---2-Methylaniline (CAS RN 95-53-4) with a purity by weight of at least 99 % | ---重量纯度至少为99%的2-甲基苯胺 | 6.5 |
| 2921490045 | ---2-(4-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 897671-69-1) with a purity by weight of 95 % or more | ---重量纯度大于等于95%的2-（4-联苯）氨基-9,9-二甲基芴 | 6.5 |
| 2921490055 | ---2-(2-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 1198395-24-2) with a purity by weight of 95 % or more | ---重量纯度大于等于95%的2-（2-联苯）氨基-9,9-二甲基芴 | 6.5 |
| 2921519010 | ----N-(4-Chlorophenyl)benzene-1,2-diamine (CAS RN 68817-71-0) with a purity by weight of 97 % or more | ----重量纯度大于等于97%的n-（4-氯苯基）苯-1,2-二胺 | 6.5 |
| 2921519090 | ----Other | ----其他 | 6.5 |
| 2921599085 | ----4,4'-Methanediyldianiline (CAS RN 101-77-9) with a purity by weight of at least 97 %, in the form of granules, for use in the manufacture of prepolymers | ----用于制造预聚物的颗粒形式的4,4’-甲基二苯胺，其重量纯度至少为97% | 6.5 |
| 2922190015 | ---Aqueous solution, containing by weight: -73 % or more 2-amino-2-methyl-1-propanol (CAS RN 124-68-5), -4,5 % or more, but not more than 27 % water (CAS RN 7732-18-5) | ---水溶液，按重量计含-73%或以上2-氨基-2-甲基-1-丙醇，-4.5%或以上，但不超过27%的水（cas rn 7732-18-5） | 6.5 |
| 2922190029 | ---N-Methyl-N-(2-hydroxyethyl)-p-toluidine (CAS RN 2842-44-6) with a purity by weight of 99 % or more | ---重量纯度大于等于99%的n-甲基-n-（2-羟乙基）-p-甲苯胺酮 | 6.5 |
| 2922190070 | ---2-Benzylaminoethanol (CAS 104-63-2) with a purity by weight of 98 % or more | ---重量纯度大于等于98%的2-苄基氨基乙醇 | 6.5 |
| 2922498513 | ----Benzyl glycinate—4-methylbenzene-1-sulfonic acid (1/1) (CAS RN 1738-76-7) with a purity by weight of 93% or more | ----重量纯度大于等于93%的甘氨酸苄酯-4-甲苯-1-磺酸（1/1） | 6.5 |
| 2922498517 | ----Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8) | ----按重量计纯度为95%或以上的甘氨酸，不论是否添加不超过5%的防结块剂二氧化硅（cas rn 112926-00-8） | 6.5 |
| 2923900050 | --Betaine hydrochloride (CAS RN 590-46-5), with a purity by weight of 93 % or more | --按重量计纯度为93%或以上的甜菜碱盐酸盐 | 6.5 |
| 2923900087 | --3-Chloro-2-hydroxypropyl)trimethylammonium chloride (CAS RN 3327-22-8), in the form of an aqueous solution containing by weight 65 % or more but not more than 71 % 3-chloro-2-hydroxypropyl)trimethylammonium chloride | --3-氯-2-羟丙基）三甲基氯化铵，水溶液形式，按重量计含有65%或以上但不超过71%的3-氯-2-羟丙基）三甲基氯化铵 | 6.5 |
| 2924190018 | ---2-(((Butylamino)carbonyl)oxy)ethyl acrylate (CAS RN 63225-53-6) with a purity by weight of 97 % or more | ---重量纯度为97%或以上的2-（（丁胺基）羰基）氧基）丙烯酸乙酯 | 6.5 |
| 2924190023 | ---Acrylamide (CAS RN 79-06-1) with a purity by weight of 97 % or more | ---重量纯度大于等于97%的丙烯酰胺 | 6.5 |
| 2924297047 | ----(S)-tert-butyl (1-amino-3-(4-iodophenyl)-1-oxopropan-2-yl)carbamate (CAS RN 868694-44-4) with a purity by weight of 95 % or more | ----（s） -重量纯度大于等于95%的叔丁基（1-氨基-3-（4-碘苯基）-1-氧代丙烷-2-基）氨基甲酸酯 | 6.5 |
| 2925199540 | ----N-Iodosuccinimide (CAS RN 516-12-1) with a purity by weight of 98,5 % or more | ----重量纯度大于等于98.5%的n-碘代琥珀酰亚胺 | 6.5 |
| 2925290050 | ---(Chloromethylene)dimethyliminium chloride (CAS RN 3724-43-4) with a purity by weight of 95 % or more | ---按重量计纯度为95%或以上的（氯亚甲基）二甲基亚铵氯化物 | 6.5 |
| 2926100020 | --Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of headings 2921, 2924, 3906 and 4002 | --品目2921、2924、3906和4002货物制造用丙烯腈 | 6.5 |
| 2926907026 | ---Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products | ---杀生物剂产品制造用纯度为95.5%或以上的氟氯氰菊酯 | 6.5 |
| 2929100025 | --1,5-Naphthylene diisocyanate (CAS RN 3173-72-6) with a purity by weight of at least 90 % | --重量纯度至少为90%的1,5-萘二异氰酸酯 | 6.5 |
| 2930909829 | ---4-amino-5-(ethylsulfanyl)-2-methoxybenzoic acid (CAS RN 71675-86-0) with a purity by weight of 98 % or more | ---4-氨基-5-（乙基磺胺基）-2-甲氧基苯甲酸，重量纯度大于等于98% | 6.5 |
| 2930909831 | ---(p-toluenesulphonyl)methyl isocyanide (CAS RN 36635-61-7) with a purity by weight of 98 % or more | ---重量纯度大于等于98%的（对甲苯磺酰基）甲基异氰 | 6.5 |
| 2930909888 | ---1-{4-[(4-Benzoylphenyl)sulphanyl]phenyl}-2-methyl-2-[(4-methylphenyl)sulphonyl]propan-1-one (CAS RN 272460-97-6) with a purity by weight of 94 % or more | ---重量纯度大于等于94%的1-{4-[（4-苯甲酰基苯基）磺酰基]苯基}-2-甲基-2-[（4-甲基苯基）磺酰基]丙烷-1-酮 | 6.5 |
| 2931399038 | ----N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) containing by weight not more than 15 % of water, and with a dry weight purity of 97 % or more | ----以重量计含水量不超过15%且干重纯度为97%或以上的n-（膦酰基甲基）亚氨基二乙酸 | 6.5 |
| 2931900025 | --N-(3-(dimethoxymethylsilyl)propyl)ethylenediamine (CAS RN 3069-29-2) with a purity by weight of 98 % or more | --重量纯度大于等于98%的n-（3-（二甲氧基甲基硅）丙基）乙二胺 | 6.5 |
| 2931900075 | --Hexadecyltrimethoxysilane (CAS RN 16415-12-6) with a purity by weight of at least 95 %, for use in the manufacture of polyethylene | --聚乙烯制造用纯度至少为95%的十六烷基三甲氧基硅烷 | 6.5 |
| 2932209018 | ---4-Hydroxycoumarin (CAS-RN 1076-38-6) with a purity by weight of 98 % or more | ---4-羟基香豆素（cas-rn 1076-38-6），重量纯度大于等于98% | 6.5 |
| 2932209023 | ---1,4-Dioxane-2,5-dione (CAS RN 502-97-6) with a purity by weight of 99,5 % or more | ---1,4-二氧六环-2,5-二酮，按重量计纯度为99.5%或以上 | 6.5 |
| 2932209053 | ---(R)-4-propyldihydrofuran-2(3H)-one (CAS RN 63095-51-2) with a purity by weight of 98 % or more | ---（r） 重量纯度大于等于98%的-4-丙基二氢呋喃-2（3h）-酮 | 6.5 |
| 2932990068 | ---3,9-Diethylidene-2,4,8,10-tetraoxaspiro[5.5]undecane (CAS RN 65967-52-4) with a purity by weight of 98 % or more | ---重量纯度大于等于98%的3,9-二亚乙基-2,4,8,10-四氧西吡咯[5.5]十一烷（cas rn 65967-52-4） | 6.5 |
| 2932990073 | ---5-Fluoro-3-methylbenzofuran-2-carboxylic acid (CAS RN 81718-76-5) with a purity by weight of 97 % or more | ---重量纯度大于等于97%的5-氟-3-甲基苯并呋喃-2-羧酸 | 6.5 |
| 2932990078 | ---Methyl 2,2-difluoro-1,3-benzodioxole-5-carboxylate (CAS RN 773873-95-3) with a purity by weight of 98 % or more | ---重量纯度大于等于98%的2,2-二氟-1,3-苯并二恶英-5-羧酸甲酯 | 6.5 |
| 2932990083 | ---6,11-Dihydrodibenz[b,e]oxepin-11-one (CAS RN 4504-87-4) with a purity by weight of 98 % or more | ---纯度（按重量计）为98%或以上的6,11-二氢二苯并[b，e]奥克西平-11-酮 | 6.5 |
| 2933199013 | ----3-(Difluoromethyl)-5-fluoro-1-methyl-1H-pyrazole-4-carbonyl fluoride (CAS RN 1255735-07-9) with a purity by weight of 95 % or more | ----3-（二氟甲基）-5-氟-1-甲基-1h-吡唑-4-羰基氟化物，按重量计纯度大于等于95% | 6.5 |
| 2933199017 | ----1,3-dimethyl-1H-pyrazole (CAS RN 694-48-4) with a purity by weight of 98 % or more | ----重量纯度大于等于98%的1,3-二甲基-1h-吡唑 | 6.5 |
| 2933199023 | ----Fluindapyr (ISO) (CAS RN 1383809-87-7) with a purity by weight of 96 % or more | ----按重量计纯度为96%或以上的氟达吡 | 6.5 |
| 2933199027 | ----3-(3,3,3-trifluoro-2,2-dimethylpropoxy)-1H-pyrazole-4-carboxylic acid (CAS RN 2229861-20-3) with a purity by weight of 95 % or more | ----3-（3,3,3-三氟-2,2-二甲基丙氧基）-1h-吡唑-4-羧酸，重量纯度大于等于95% | 6.5 |
| 2933199033 | ----Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine | ----兽医用纯度为95%或以上的氟虫腈 | 6.5 |
| 2933199043 | ----tert-Butyl 2-(3,5-dimethyl-1H-pyrazol-4-yl)acetate (CAS RN 1082827-81-3) with a purity by weight of 95 % or more | ----重量纯度大于等于95%的2-（3,5-二甲基-1h-吡唑基）乙酸叔丁酯 | 6.5 |
| 2933299023 | ----1,1'-Thiocarbonylbis(imidazole) (CAS RN 6160-65-2) with a purity by weight of 95 % or more | ----重量纯度大于等于95%的1,1'-硫代羰基双（咪唑） | 6.5 |
| 2933399974 | ----4-Aminopyridine-2-carboxamide (CAS RN 100137-47-1) with a purity by weight of 98 % or more | ----重量纯度大于等于98%的4-氨基吡啶-2-甲酰胺 | 6.5 |
| 2933399981 | ----4-Hydroxy-3-pyridinesulphonic acid (CAS RN 51498-37-4) with a purity by weight of 98 % or more | ----重量纯度大于等于98%的4-羟基-3-吡啶磺酸 | 6.5 |
| 2933399982 | ----Picloram (ISO) (CAS RN 1918-02-1) containing by weight not more than 15 % of water and with a dry weight purity of 92 % or more | ----苦草胺（iso）（cas rn 1918-02-1），按重量计含水不超过15%，干重纯度为92%或以上 | 6.5 |
| 2933399983 | ----2-Hydroxy-4-azoniaspiro[3,5]nonane chloride (CAS RN 15285-58-2) with a purity by weight of 97 % or more | ----重量纯度大于等于97%的2-羟基-4-偶氮螺环[3,5]壬酰氯 | 6.5 |
| 2933399984 | ----Diethyl(3-pyridyl)borane (CAS RN 89878-14-8) with a purity by weight of 98 % or more | ----重量纯度大于等于98%的二乙基（3-吡啶基）硼烷 | 6.5 |
| 2933399986 | ----3-(N-hydroxycarbamimidoyl)pyridine 1-oxide (CAS RN 92757-16-9) with a purity by weight of 97 % or more | ----按重量计纯度为97%或更高的3-（n-羟基氨基甲咪唑基）氧化吡啶 | 6.5 |
| 2933399987 | ----6-Chloro-N-(2,2-dimethylpropyl)pyridine-3-carboxamide (CAS RN 585544-20-3) with a purity by weight of 97 % or more | ----重量纯度大于等于97%的6-氯-n-（2,2-二甲基丙基）吡啶-3-甲酰胺 | 6.5 |
| 2933399988 | ----Benzyl 4-amino-3-chloro-6-(4-chloro-2-fluoro-3-methoxyphenyl)-5-fluoropyridine-2-carboxylate (CAS RN 1390661-72-9) with a purity by weight of 92 % or more | ----重量纯度大于等于92%的4-氨基-3-氯-6-（4-氯-2-氟-3-甲氧基苯基）-5-氟吡啶-2-羧酸苄酯 | 6.5 |
| 2933599568 | ----Guanine (CAS RN 73-40-5) with a purity by weight of 99 % or more | ----重量纯度为99%或以上的鸟嘌呤 | 6.5 |
| 2933698033 | ----2,4,6-Trichloro-1,3,5-triazine (CAS RN 108-77-0) with a purity by weight of 99 % or more | ----重量纯度大于等于99%的2,4,6-三氯-1,3,5-三嗪 | 6.5 |
| 2933998060 | ----2-[(6,11-Dihydro-5H-dibenz[b,e]azepin-6-yl)-methyl]-1H-isoindole-1,3(2H)-dione (CAS RN 143878-20-0) with a purity by weight of 99 % or more | ----2-[（6,11-二氢-5h-二苯并[b，e]氮杂吡啶-6-基）-甲基]-1h-异吲哚-1,3（2h）-二酮（cas rn 143878-20-0），重量纯度大于等于99% | 6.5 |
| 2933998066 | ----(6-(4-fluorobenzyl)-3,3-dimethyl-2,3-dihydro-1H-pyrrolo[3,2-b]pyrid-5-yl)methanol (CAS RN 1799327-42-6) with a purity by weight of 98 % or more | ----（6-（4-氟苄基）-3,3-二甲基-2,3-二氢-1h-吡咯并[3,2-b]吡啶-5-基）甲醇，按重量计纯度为98%或以上 | 6.5 |
| 2933998070 | ----5-(Bis-(2-hydroxyethyl)-amino)-1-methyl-1H-benzimidazole-2-butanoic acid ethyl ester (CAS RN 3543-74-6) with a purity by weight of 98 % or more | ----重量纯度大于等于98%的5-（双-（2-羟乙基）-氨基）-1-甲基-1h-苯并咪唑-2-丁酸乙酯 | 6.5 |
| 2933998080 | ----Pyrrole-2-carboxaldehyde (CAS RN 1003-29-8) with a purity by weight of 97 % or more | ----重量纯度大于等于97%的吡咯-2-甲醛 | 6.5 |
| 2933998087 | ----Carfentrazone-ethyl (ISOM) (CAS RN 128639-02-1) with a purity by weight of 90 % or more | ----纯度（按重量计）为90%或以上的乙基卡芬太松 | 6.5 |
| 2934208025 | ---1,2-Benzisothiazol-3(2H)-one (CAS RN 2634-33-5) in the form of a powder with a purity by weight of 95 % or more, or in an aqueous mixture containing by weight 20 % or more of 1,2-benzisothiazol-3(2H)-one | ---1,2-苯并异噻唑-3（2h）-酮，呈粉末形式，按重量计纯度为95%或以上，或在含有20%或以上1,2-苯并异噻唑-3（2h）-酮的水混合物中 | 6.5 |
| 2934999017 | ----(S)-4-(tert-butoxycarbonyl)-1,4-oxazepane-2-carboxylic acid (CAS RN 1273567-44-4) with a purity by weight of 95 % or more | ----（s） 纯度（按重量计）为95%或以上的-4-（叔丁氧羰基）-1,4-氧氮杂环戊烷-2-羧酸 | 6.5 |
| 2934999029 | ----(2R,5S)-tert-butyl 4-benzyl-2-methyl-5-(((R)-3-methylmorpholino)methyl)piperazine-1-carboxylate (CAS RN 1403902-77-1) with a purity by weight of 98 % or more | ----重量纯度大于等于98%的（2r，5s）-4-苄基-2-甲基-5-（（（r）-3-甲基吗啉基）甲基）哌嗪-1-羧酸叔丁酯 | 6.5 |
| 2934999033 | ----(2R,3R,5R)-5-(4-amino-2-oxopyrimidin-1(2H)-yl)-2-((benzoyloxy)methyl)-4,4-difluorotetrahydrofuran-3-yl benzoate (CAS RN 134790-39-9) with a purity by weight of 98 % or more | ----重量纯度大于等于98%的（2r，3r，5r）-5-（4-氨基-2-氧嘧啶-1（2h）-基）-2-（（苯甲酰氧基）甲基）-4,4-二氟四氢呋喃-3-基苯甲酸酯 | 6.5 |
| 2934999065 | ----Benzo[b]thiophen-10-methoxycycloheptanone (CAS RN 59743-84-9) with a purity by weight of 98 % or more | ----重量纯度大于等于98%的苯并噻吩-10-甲氧基环庚酮 | 6.5 |
| 2934999069 | ----3-methyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[d]oxazol-2(3H)-one (CAS RN 1220696-32-1) with a purity by weight of 95 % or more | ----重量纯度大于等于95%的3-甲基-5-（4,4,5,5-四甲基-1,3,2-二氧代苯并[d]恶唑-2（3h）-酮 | 6.5 |
| 2934999070 | ----1,3,4-thiadiazolidine-2,5-dithione (CAS RN 1072-71-5) with a purity by weight of 95 % or more | ----1,3,4-噻二唑烷-2,5-连二硫酮（cas rn 1072-71-5），按重量计纯度为95%或以上 | 6.5 |
| 2935909044 | ---4-[2-(7-Methoxy-4,4-dimethyl-1,3-dioxo-3,4-dihydroisoquinolin-2(1H)-yl)ethyl]bezenesulphonamide (CAS RN 33456-68-7) with a purity by weight of 99,5 % or more | ---4-[2-（7-甲氧基-4,4-二甲基-1,3-二氧基-3,4-二氢异喹啉-2（1h）-基）乙基]苯磺胺（cas rn 33456-68-7），按重量计纯度为99.5%或以上 | 6.5 |
| 2935909070 | ---(4S)-4-hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e]thiazine-6-sulfonamide-1,1-dioxide (CAS RN 154127-42-1) with a purity by weight of 97 % or more | ---（4s）-4-羟基-2-（3-甲氧基丙基）-3,4-二氢-2h-噻吩并[3,2-e]噻嗪-6-磺酰胺-1,1-二氧化物，按重量计纯度为97%或以上 | 6.5 |
| 3002130010 | ---Diagnostic reagents of a kind used in the diagnosis of SARS-CoV virus species infections | ---一种用于诊断sars-cov病毒感染的诊断试剂 | 0 |
| 3002130090 | ---Other | ---其他 | 0 |
| 3002140010 | ---Diagnostic reagents of a kind used in the diagnosis of SARS-CoV virus species infections | ---一种用于诊断sars-cov病毒感染的诊断试剂 | 0 |
| 3002140090 | ---Other | ---其他 | 0 |
| 3002150010 | ---SARS-CoV virus species diagnostic reagents, whether or not put up in the form of kits | ---sars-cov病毒种诊断试剂，不论是否以试剂盒的形式提供 | 0 |
| 3002150090 | ---Other | ---其他 | 0 |
| 3002201000 | --Vaccines against SARS-related coronaviruses (SARS-CoV species) | --sars相关冠状病毒疫苗（sars冠状病毒属） | 0 |
| 3002209000 | --Other | --其他 | 0 |
| 3201902010 | ---Rhus chinensis gall (Galla chinensis) water-based extract, with a tannin content by weight of 85 % or less | ---五倍子（gallachinensis）水性提取物，单宁含量（按重量计）不超过85% | 5.8 |
| 3201902090 | ---Other | ---其他 | 5.8 |
| 3204150020 | ---Colourant C.I. Vat Blue 1 (CAS RN 482-89-3) and preparations based thereon with a colourant C.I. Vat Blue 1 content of 94 % or more by weight | ---着色剂c.i.还原蓝1及其制备方法，着色剂c.i.还原蓝1的重量含量大于等于94% | 6.5 |
| 3602000010 | -Free flowing porous prills predominantly based on ammonium nitrate with the following composition (in percentage by weight): —ammonium nitrate >99,4 —(total nitrogen >34,5) —anionic polymer 0,28 —coating 0,08 The oil absorption of the prills is >10 % by weight. The prills have a bulk density of 0,72 g /cm³. Free flowing porous prills predominantly based on ammonium nitrate with the following composition (in percentage by weight): —ammonium nitrate > 99 —(total nitrogen > 34,5) —magnesium nitrate 0,4 —mixture of diammonium phosphate, ammonium sulphate and boric acid 0,06 —coating 0,08 The oil absorption of the prills is >7 % by weight. The prills have a bulk density of 0,80 g /cm³. | -主要以硝酸铵为基础的自由流动多孔颗粒，具有以下组成（重量百分比）：-硝酸铵>99,4-（总氮>34,5）-阴离子聚合物0,28-涂层0,08。颗粒的吸油量>10%（重量百分比）。颗粒的体积密度为0.72 g/cm³。主要以硝酸铵为基础的自由流动多孔颗粒，具有以下组成（重量百分比）：-硝酸铵>99-（总氮>34,5）-硝酸镁0,4-磷酸二铵、硫酸铵和硼酸的混合物0,06-涂层0,08。颗粒的吸油量重量百分比>7%。颗粒的体积密度为0.80 g/cm³ | 6.5 |
| 3602000090 | -Other | -其他 | 6.5 |
| 3801100010 | --Artificial graphite in powder form, (CAS RN 7782-42-5) with: -a secondary particle structure which is aggregated from smaller primary particles. -without coating on the surface, -particle size represented by d50 value of 13,5 µm (± 0,5), -specific surface area (measured by BET) less than 2,0 m²/g, -tap density: 1,10 ~ 1,70 g/cm³ , -specific Discharge Capacity of 351,0 mAh/g (±3,0), -initial efficiency of 94,0 % (± 1,0) | --粉末状人造石墨（cas rn 7782-42-5），具有二次粒子结构，由较小的一次粒子聚集而成。-表面无涂层，-粒径以d50值表示为13,5µm（±0,5），-比表面积（bet测量）小于2,0 m²/g，-抽头密度：1,10~1,70 g/cm³，-比放电容量为351,0 mah/g（±3,0），-初始效率为94,0%（±1,0） | 3.6 |
| 3801100020 | --Artificial graphite (CAS RN 7782-42-5) powder form, with: -specific surface area (measured by BET) of 0,8 m²/g (± 0,25), -tap density: 0,85 g/cm³ (± 0,10), -particle size represented by d50 value of 21,0 µm (± 2,0), -specific discharge capacity of 351,0 mAh/g (±3,0), -initial efficiency of 94,0 % (± 2,0) | --人造石墨（cas rn 7782-42-5）粉末状，比表面积为0.8 m²/g（±0.25），抽头密度为0.85 g/cm³（±0.10），粒径为21.0µm（±2.0），比放电容量为351.0 mah/g（±3.0），初始效率为94.0%（±2.0） | 3.6 |
| 3801100090 | --Other | --其他 | 3.6 |
| 3815909038 | ---Photoinitiator, containing by weight: -80 % or more of polyethylene glycol di[β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate (CAS RN 886463-10-1), -not more than 17 % of polyethylene glycol [β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate | ---光引发剂，按重量计含-80%或以上聚乙二醇二[β-4-[4-（2-二甲氨基-2-苄基）丁酰基苯基]哌嗪]丙酸盐（cas rn 886463-10-1），不超过17%聚乙二醇[β-4-[4-（2-二甲氨基-2-苄基）丁酰基苯基]哌嗪]丙酸盐 | 6.5 |
| 3815909048 | ---Photoinitiator containing by weight: -88 % or more of α-(2-benzoylbenzoyl)-ω-[(2-benzoylbenzoyl)oxy]-poly(oxy-1,2-ethanediyl) (CAS RN 1246194-73-9), -not more than 12 % of α-(2-benzoylbenzoyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl) (CAS RN 1648797-60-7) | ---以重量计含有-88%或更多α-（2-苯甲酰基苯甲酰基）-ω-[（2-苯甲酰基苯甲酰基）氧基]-聚（氧基-1,2-乙二基）（cas rn 1246194-73-9），不超过12%的α-（2-苯甲酰基苯甲酰基）-ω-羟基聚（氧基-1,2-乙二基）（cas rn 1648797-60-7） | 6.5 |
| 3822000010 | -SARS-CoV virus species diagnostic reagents, whether or not put up in the form of kits | -sars-cov病毒种诊断试剂，不论是否以试剂盒的形式提供 | 0 |
| 3822000090 | -Other | -其他 | 0 |
| 3823191020 | ----12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) for use in the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters | ----聚甘油-聚-12-羟基十八酸酯生产中使用的12-羟基十八酸 | 2.9 |
| 3824999262 | -------Solution of 9-borabicyclo[3.3.1]nonane (CAS RN 280-64-8) in tetrahydrofurane (CAS RN 109-99-9), containing by weight 6 % or more 9-borabicyclo[3.3.1]nonane | -------9-硼双环[3.3.1]壬烷（cas rn 280-64-8）在四氢呋喃（cas rn 109-99-9）中的溶液，按重量计含有6%或更多9-硼双环[3.3.1]壬烷 | 6.5 |
| 3902909065 | ----Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 39 | ----溴含量为60重量%或以上但不超过68%的溴化丁二烯-苯乙烯共聚物，其形式如第39章注释6（b）所述 | 6.5 |
| 3903909033 | ---Copolymer of styrene, divinylbenzene and chloromethylstyrene (CAS RN 55844-94-5) with a purity by weight of 99 % or more | ---苯乙烯、二乙烯基苯和氯甲基苯乙烯的共聚物，重量纯度大于等于99% | 6.5 |
| 3905300092 | ----Other | ----其他 | 6.5 |
| 3909400070 | --Polymer in the form of flakes composed of 98 % or more by weight of phenolic resin (brominated octylphenol-formaldehyde) with a softening point of 80°C or more but not exceeding 95°C according to standard ASTM E28-92 (CAS RN 112484-41-0) | --根据标准astm e28-92（cas rn 112484-41-0），由软化点为80℃或以上但不超过95℃的98%（按重量计）酚醛树脂（溴化辛基苯酚甲醛）组成的片状聚合物 | 6.5 |
| 3910000065 | -Liquid copolymer based on polydimethylsiloxane with terminal epoxide groups CAS RN 2102536-93-4) | -端环氧基聚二甲基硅氧烷液体共聚物（cas rn 2102536-93-4） | 6.5 |
| 3911909938 | -----Mixture containing by weight: -90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and -10 % (± 1 %) of a hydrogenated styrene butadiene copolymer (CAS RN 66070-58-4) | -----按重量计含有-90%（±1%）的1,4:5,8-二甲基萘、2-亚乙基-1,2,3,4,4a、5,8,8a-八氢-与3a、4,7,7a-四氢-4,7-甲烷-1h-茚的氢化聚合物（cas rn 881025-72-5）和-10%（±1%）的氢化丁苯共聚物（cas rn 66070-58-4）的混合物 | 6.5 |
| 3911909948 | -----Mixture containing by weight: -90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and -10 % (± 1 %) of an ethylene-propylene copolymer (CAS RN 9010-79-1) | -----按重量计含有-90%（±1%）氢化的1,4:5,8-二甲萘、2-亚乙基-1,2,3,4,4a、5,8,8a-八氢-与3a、4,7,7a-四氢-4,7-亚甲基-1h-茚的聚合物（cas rn 881025-72-5）和-10%（±1%）乙丙共聚物（cas rn 9010-79-1）的混合物 | 6.5 |
| 3920102530 | -------Mono-layered High-Density Polyethylene film: -containing by weight 99 % or more of polyethylene, -with a thickness of 12 μm or more but not more than 20 μm, -with a length of 4000 m or more but not more than 7000 m, -with a width of 600 mm or more but not more than 900 mm | -------单层高密度聚乙烯薄膜：按重量计含有99%或以上的聚乙烯，厚度为12μm或以上但不超过20μm，长度为4000 m或以上但不超过7000 m，宽度为600 mm或以上但不超过900 mm | 6.5 |
| HS_Code | English Name 英文品名 | Chinese Name 中文品名 | MFN 特惠税率 |
| 3920610040 | ---Extruded thermoplastic foils or films of polycarbonate with: -matt surface texture on both sides, -a thickness of more than 50 μm but not more than 200 μm, -a width of 800 mm or more, but not more than 1 500 mm and -a length of 915 m or more, but not more 2 500 m, for use in the production of retroreflective products | ---聚碳酸酯挤压热塑性箔或膜，两面表面粗糙，厚度大于50μm，但不超过200μm，宽度大于800 mm，但不超过1500 mm，长度大于915 m，但不超过2500 m，用于生产反光产品 | 6.5 |
| 3920621968 | -----Poly(ethylene terephthalate) film in rolls: -with a thickness of 50 μm or more but not more than 350 μm, and -covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm | -----成卷的聚对苯二甲酸乙二酯薄膜：-厚度为50μm或以上但不超过350μm，并覆盖一层溅射贵金属，如金或钯，厚度为0.02μm或以上但不超过0.06μm | 6.5 |
| 3920629020 | ----Poly(ethylene terephthalate) film in rolls: -with a thickness of 50 μm or more but not more than 350 μm, and -covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm | ----成卷的聚对苯二甲酸乙二酯薄膜：-厚度为50μm或以上但不超过350μm，并覆盖一层溅射贵金属，如金或钯，厚度为0.02μm或以上但不超过0.06μm | 6.5 |
| 3920690030 | ---Mono- or multilayer, transverse oriented, shrink film: -composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters, -with a thickness of 20 μm or more but not more than 100 μm, -with a length of 2 385 m or more but not more than 9 075 m, -biodegradable and compostable (as determined by the method EN 13432) | ---单层或多层横向收缩膜：-由聚乳酸重量比大于85%，无机或有机添加剂重量比不大于5%，基于可生物降解聚酯的添加剂重量比不大于10%组成，-厚度为20μm或以上，但不超过100μm，-长度为2 385 m或以上但不超过9 075 m，-可生物降解和可堆肥（根据方法en 13432确定） | 6.5 |
| 3920690070 | ---Mono- or multilayer, biaxially oriented film: -composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters, -with a thickness of 9 μm or more but not more than 120 μm, -with a length of 1 395 m or more but not more than 21 560 m, -biodegradable and compostable (as determined by the method EN 13432) | ---单膜或多层膜，双轴取向膜：-由重量超过85%的聚乳酸、重量不超过5%的无机或有机添加剂和重量不超过10%的基于可生物降解聚酯的添加剂组成，-厚度为9μm或以上但不超过120μm，-长度为1395 m或以上但不超过21560 m，-可生物降解和可堆肥（根据方法en 13432测定） | 6.5 |
| 3920992848 | -----Thermoplastic polyurethane foil in rolls, with: -a width of 900 mm or more but not more than 1016 mm, -a matt finish, -a thickness of 0,4 mm (± 8 %), -an elongation at break of 480 % or more (ASTM D412 (Die C)), -a tensil strength in machine direction of 470 (± 10) kg/cm² (ASTM D412 (Die C)), -a Shore A hardness of 90 (± 3) (ASTM D2240), -a tear strength of 100 (± 10) kg/cm² (ASTM D624 (Die C)), -a melting point of 165°C (± 10 °C) | -----卷装热塑性聚氨酯箔，宽度为900 mm或以上但不超过1016 mm，-亚光饰面，-厚度为0.4 mm（±8%），-断裂伸长率为480%或以上（astm d412（模具c）），-机器方向的拉伸强度为470（±10）kg/cm²（astm d412（模具c）），-肖氏a硬度为90（±3）（astm d2240），-撕裂强度为100（±10）kg/cm²（astm d624（模具c）），-熔点为165°c（±10°c） | 6.5 |
| 3921190045 | ----Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: -zero transversal production direction (TD) shrinkage, -a total thickness of 8 μm or more, but not more than 50 μm, -a width of 15 mm or more, but not more than 900 mm, -a length of more than 200 m, but not more than 8 000 m, -an average pore size between 0,02 μm and 0,1 μm -laminated or not with a Polypropylene non-woven mat of 50 to 200 µm thickness -coated or not with surfactant -coated or not on 1 or 2 sides with a ceramic layer of min 1 µm thickness or more, but not more than 5 µm -coated or not on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 µm thickness or more, but not more than 5 µm | ----聚丙烯微孔单层膜或聚丙烯、聚乙烯和聚丙烯微孔三层膜，每层膜具有：-零横向生产方向（td）收缩，-总厚度为8μm或以上，但不超过50μm，-宽度为15 mm或以上，但不超过900 mm，-长度超过200 m，但不超过8000 m，-平均孔径介于0.02μm和0.1μm之间-层压或不层压50至200μm厚的聚丙烯无纺布垫-涂有或不涂有表面活性剂-涂有或不涂在1或2个侧面，陶瓷层厚度至少为1μm或以上，但厚度不超过5µm-在一面或两面涂有或不涂有最小厚度为0.5µm或以上但不超过5µm的pvdf型或类似粘性粘合剂 | 6.5 |
| 3926300050 | --Coated interior or exterior decorative parts consisting of: -a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and -a PVC foil, -not containing layers of copper, nickel or chromium, for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705 | --有涂层的内部或外部装饰件，包括：-丙烯腈-丁二烯-苯乙烯共聚物（abs），不论是否与聚碳酸酯混合，和-pvc箔，-不含铜、镍或铬层，用于制造品目8701至8705的机动车零件 | 6.5 |
| 3926906000 | --Protective face shields/visors | --防护面罩/面罩 | 6.5 |
| 3926909743 | ---Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 µm or more but not more than 4,95 μm | ---水和按重量计19%或以上但不超过35%的丙烯腈、甲基丙烯腈和甲基丙烯酸异冰片酯或其他甲基丙烯酸酯共聚物的膨胀空心微球的混合物，直径为3µm或以上但不超过4,95μm | 6.5 |
| 3926909748 | ---Coated interior or exterior decorative parts consisting of: -a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and -a PVC foil, -not containing layers of copper, nickel or chromium, for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705 | ---有涂层的内部或外部装饰件，包括：-丙烯腈-丁二烯-苯乙烯共聚物（abs），不论是否与聚碳酸酯混合，和-pvc箔，-不含铜、镍或铬层，用于制造品目8701至8705的机动车零件 | 6.5 |
| 4016930030 | ---Rectangular ethylene-propylene-diene rubber gasket, with: -a length of 72 mm or more but not more than 825 mm, -a width of 18 mm or more but not more than 155 mm, -a peak temperature of 150°C or more but not more than 240°C, -a permissible material outflow at the place of the mold split of not more than 0,3 mm | ---矩形乙丙二烯橡胶垫片，带：-长度大于等于72 mm但不超过825 mm，-宽度大于等于18 mm但不超过155 mm，-峰值温度大于等于150°c但不超过240°c，-模具裂口处允许的材料流出量不超过0.3 mm | 2.5 |
| 4401221000 | ---Of eucalyptus (Eucalyptus spp.) | ---桉木 | 0 |
| 4401229000 | ---Other | ---其他 | 0 |
| 4412330010 | ---Plywood, whether or not coated, with outer plies of wood specified under subheading 4412 33, with at least one outer ply of birch wood | ---胶合板，不论是否有涂层，外层为第4412子目第33子目的木材，外层至少为一层桦木 | 7 |
| 4412330090 | ---Other | ---其他 | 7 |
| 5208121620 | -----With: - a width of not more than 145 cm, - a weight of 120 g/m² or more, - 30 or more, but not more than 45 wefts per cm, - a tuck-in selvedge on both sides, where from the inside out, the 15 mm (± 2 mm) wide tuck-in selvedge consists of a 6 mm or more but not more than 9 mm wide strip of plain weave and a 6 mm or more but not more than 9 mm wide strip of panama weave | -----宽度不超过145 cm，-重量不超过120 g/m²，-30或以上，但每cm不超过45纬纱，-两侧有卷起的镶边，从内到外，15 mm（±2 mm）宽的卷边由6 mm或以上但不超过9 mm宽的平纹织带和6 mm或以上但不超过9 mm宽的巴拿马织带组成 | 8 |
| 5208121680 | -----Other | -----其他 | 8 |
| 5208129620 | -----With: - a width of not more than 145 cm, - a weight of not more than 145 g/m², - 30 or more, but not more than 45 wefts per cm, - a tuck-in selvedge on both sides, where from the inside out, the 15 mm (± 2 mm) wide tuck-in selvedge consists of a 6 mm or more but not more than 9 mm wide strip of plain weave and a 6 mm or more but not more than 9 mm wide strip of panama weave | -----宽度不超过145 cm，—重量不超过145 g/m²，—30条或更多，但每cm不超过45条纬线，—两侧有卷起的镶边，从内到外，15 mm（±2 mm）宽的卷边由6 mm或以上但不超过9 mm宽的平纹织带和6 mm或以上但不超过9 mm宽的巴拿马织带组成 | 8 |
| 5208129680 | -----Other | -----其他 | 8 |
| 5603141020 | ----Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media: -of weight of 160 g/m² or more but not more than 300 g/m² -laminated on one side with a membrane or a membrane and aluminium -with filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class M -pleatable | ----无纺布，由聚对苯二甲酸乙二酯纺丝粘合介质组成：-重量为160 g/m²或以上，但不超过300 g/m²-一侧用膜或膜和铝层压-过滤效率符合din 60335-2-69:2008最低过滤等级m-可折叠 | 4.3 |
| 5603141090 | ----Other | ----其他 | 4.3 |
| 5603149060 | ----Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media: -of weight of 160 g/m² or more but not more than 300 g/m², -not laminated -with filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class M -pleatable | ----无纺布，由聚对苯二甲酸乙二酯纺丝粘合介质组成：-重量为160 g/m²或以上，但不超过300 g/m²，-未层压-过滤效率符合din 60335-2-69:2008最低过滤等级m-可折叠 | 4.3 |
| 6307909311 | --------Filtering facepieces FFP2 and FFP3 according to EN149 | --------根据en149过滤面板ffp2和ffp3 | 6.3 |
| 6307909319 | --------Other | --------其他 | 6.3 |
| 6307909320 | -------Other | -------其他 | 6.3 |
| 6307909390 | ------Other | ------其他 | 6.3 |
| 6307909511 | --------Medical face masks according to EN14683 | --------符合en14683标准的医用面罩 | 6.3 |
| 6307909519 | --------Other | --------其他 | 6.3 |
| 6307909520 | -------Other | -------其他 | 6.3 |
| 6307909591 | -------Hand-made | -------手工制作 | 6.3 |
| 6307909595 | -------Other | -------其他 | 6.3 |
| 6307909820 | -----Nonwovens | -----无纺布制 | 6.3 |
| 6403911110 | ------Sports footwear; tennis shoes, basketball shoes, gym shoes, training shoes and the like | ------运动鞋靴；网球鞋、篮球鞋、体操鞋、训练鞋及类似鞋 | 8 |
| 6403911190 | ------Other | ------其他 | 8 |
| 6403911310 | -------Sports footwear; tennis shoes, basketball shoes, gym shoes, training shoes and the like | -------运动鞋靴；网球鞋、篮球鞋、体操鞋、训练鞋及类似鞋 | 8 |
| 6403911390 | -------Other | -------其他 | 8 |
| 6403911610 | --------Sports footwear; tennis shoes, basketball shoes, gym shoes, training shoes and the like | --------运动鞋靴；网球鞋、篮球鞋、体操鞋、训练鞋及类似鞋 | 8 |
| 6403911690 | --------Other | --------其他 | 8 |
| 6403911810 | --------Sports footwear; tennis shoes, basketball shoes, gym shoes, training shoes and the like | --------运动鞋靴；网球鞋、篮球鞋、体操鞋、训练鞋及类似鞋 | 8 |
| 6403911890 | --------Other | --------其他 | 8 |
| 6403999110 | ------Sports footwear; tennis shoes, basketball shoes, gym shoes, training shoes and the like | ------运动鞋靴；网球鞋、篮球鞋、体操鞋、训练鞋及类似鞋 | 8 |
| 6403999190 | ------Other | ------其他 | 8 |
| 6403999310 | -------Sports footwear; tennis shoes, basketball shoes, gym shoes, training shoes and the like | -------运动鞋靴；网球鞋、篮球鞋、体操鞋、训练鞋及类似鞋 | 8 |
| 6403999390 | -------Other | -------其他 | 8 |
| 6403999610 | --------Sports footwear; tennis shoes, basketball shoes, gym shoes, training shoes and the like | --------运动鞋靴；网球鞋、篮球鞋、体操鞋、训练鞋及类似鞋 | 8 |
| 6403999690 | --------Other | --------其他 | 8 |
| 6403999810 | --------Sports footwear; tennis shoes, basketball shoes, gym shoes, training shoes and the like | --------运动鞋靴；网球鞋、篮球鞋、体操鞋、训练鞋及类似鞋 | 7 |
| 6403999890 | --------Other | --------其他 | 7 |
| 6903909030 | ---Silicon carbide reactor tubes and holders having a softening point of 1 400 °C or higher | ---软化点为1400°c或更高的碳化硅反应器管和支架 | 5 |
| 6909190040 | ---Ceramic-carbon absorption cartridges with the following characteristics: -extruded fired ceramic bound multicellular cylindrical structure, -10 % or more by weight but not more than 35 % by weight of activated carbon, -65 % or more by weight but not more than 90 % by weight of ceramic binder, -with a diameter of 29 mm or more but not more than 41 mm, -a length of not more than 150 mm, -fired at temperature of 800 °C or more, and -for vapours adsorption, of a kind used for assembly in fuel vapours absorbers in fuel systems of motor vehicles | ---陶瓷碳吸收筒具有以下特性：-挤压烧结陶瓷结合多孔圆柱形结构，-活性炭重量的10%或以上，但不超过35%，-陶瓷粘合剂重量的65%或以上，但不超过90%，-直径为29毫米或以上但不超过41毫米，长度不超过150毫米，在800℃或以上的温度下燃烧，以及用于蒸汽吸附的一种，用于装配在机动车辆燃油系统的燃油蒸汽吸收器中 | 5 |
| 7308200011 | --Utility scale tubular steel wind towers, whether or not tapered, whether or not assembled, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications - equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when fully assembled | --无论是在没有锥形的情况下，无论是否安装，无论是嵌入的塔架基础部分，不论是否与机舱或转子叶片连接，用于支撑机舱和转子叶片的实用规模的管状钢风塔，用于在发电能力的风力涡轮机中——无论是在岸上还是在岸上。或海上应用-等于或超过1.00兆瓦，且在完全组装时，从塔架底部到机舱底部的最小高度为50米 | 0 |
| 7308200090 | --Other | --其他 | 0 |
| 7308909811 | ---Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications - equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled | ---风塔的钢截面，用于在公用尺度的管状风塔的装配中，无论是否有锥形，不论是否包括嵌入塔基部分，不论是否与吊舱或转子叶片连接，被设计成支撑机舱和转子叶片，用于陆上或海上发电容量等于或超过1.00兆瓦的风力涡轮机，当风塔完全组装时，从风塔底部到风舱底部的最小高度为50米 | 0 |
| 7308909890 | ---Other | ---其他 | 0 |
| 7318159511 | -------Of stainless steel | -------不锈钢制 | 3.7 |
| 7318159519 | -------Other | -------其他 | 3.7 |
| 7318159585 | -------Of stainless steel | -------不锈钢制 | 3.7 |
| 7318159589 | -------Other | -------其他 | 3.7 |
| 7318240040 | ---Tube or pipe restraint joint elements: -of stainless steel according to specification 17-4PH or of steel according to specification tool steel S7, -produced by metal injection moulding, -with a rockwell hardness of 38 HRC (± 1) or 53 HRC (+ 2/- 1), -measuring 7 mm x 4 mm x 5 mm or more, but not more than 40 mm x 20 mm x 10 mm | ---管或管约束接头元件：-由符合规范17-4ph的不锈钢制成，或由符合规范工具钢s7的钢制成，-通过金属注射成型生产，-洛氏硬度为38 hrc（±1）或53 hrc（+2/-1），测量值为7 mm x 4 mm x 5 mm或更大，但不超过40 mm x 20 mm x 10 mm | 3.7 |
| 7326909440 | ----Steel ball neck, drop forged, machined, also heat treated or surface treated, having an angle between the centre of the conical head and the arm of less than 90° or having an angle between the centre of the ball and the arm of less than 90°, for use in the manufacture of trailer hitches for passenger cars | ----落锻、机加工、热处理或表面处理的钢球颈，锥头中心与臂夹角小于90°，或钢球中心与臂夹角小于90°，用于制造客车拖车钩 | 2.7 |
| 7506200010 | --Sheets and strips in coils of nickel alloy C276 (EN 2.4819) with -a thickness of 0,5 mm or more but not more than 3 mm, -a width of 770 mm or more but not more than 1 250 mm | --镍合金c276（en 2.4819）卷制薄板和带材，厚度为0.5 mm或以上，但不超过3 mm，宽度为770 mm或以上，但不超过1 250 mm | 3.3 |
| 7506200020 | --Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with: -a thickness of 0,5 mm or more but not more than 3 mm, -a width of 250 mm or more but not more than 1 219 mm | --符合标准asme sb-582/uns n06030的镍合金卷制薄板和带材：-厚度为0.5 mm或以上但不超过3 mm，-宽度为250 mm或以上但不超过1 219 mm | 3.3 |
| 7506200090 | --Other | --其他 | 3.3 |
| 7606129291 | -------For use as body panels in the automotive industry or for use in the manufacture of aircraft parts | -------在汽车工业中用作车身面板或在飞机零件制造中使用 | 7.5 |
| 7606129295 | -------Other | -------其他 | 7.5 |
| 7606129385 | -------For use as body panels in the automotive industry or for use in the manufacture of aircraft parts | -------在汽车工业中用作车身面板或在飞机零件制造中使用 | 7.5 |
| 7606129386 | -------Other | -------其他 | 7.5 |
| 7606129921 | -------For use as body panels in the automotive industry or for use in the manufacture of aircraft parts | -------在汽车工业中用作车身面板或在飞机零件制造中使用 | 7.5 |
| 7606129925 | -------Other | -------其他 | 7.5 |
| 7606129985 | -------For use as body panels in the automotive industry or for use in the manufacture of aircraft parts | -------在汽车工业中用作车身面板或在飞机零件制造中使用 | 7.5 |
| 7606129986 | -------Other | -------其他 | 7.5 |
| 7606920085 | ----For use as body panels in the automotive industry or for use in the manufacture of aircraft parts | ----在汽车工业中用作车身面板或在飞机零件制造中使用 | 7.5 |
| 7606920086 | ----Other | ----其他 | 7.5 |
| 7607111111 | ------Consigned from Thailand | ------泰国发货 | 7.5 |
| 7607111119 | ------Other | ------其他 | 7.5 |
| 7607111991 | ------Aluminium converter foil | ------铝转炉箔 | 7.5 |
| 7607111994 | ------Household aluminium foil | ------家用铝箔 | 7.5 |
| 7607111996 | ------Other | ------其他 | 7.5 |
| 7607119044 | ------Of a thickness of not less than 0,03 mm | ------厚度不小于0.03毫米 | 7.5 |
| 7607119046 | ------Other | ------其他 | 7.5 |
| 7607119048 | ------Of a thickness of not less than 0,03 mm | ------厚度不小于0.03毫米 | 7.5 |
| 7607119049 | ------Other | ------其他 | 7.5 |
| 7607119051 | ------Of a thickness of not less than 0.03 mm but less than 0.2 mm | ------厚度不小于0.03 mm但小于0.2 mm | 7.5 |
| 7607119052 | -------For use as body panels in the automotive industry | -------在汽车工业中用作车身面板 | 7.5 |
| 7607119053 | -------Other | -------其他 | 7.5 |
| 7607119056 | ------Other | ------其他 | 7.5 |
| 7607119071 | ------Of a thickness of not less than 0,03 mm | ------厚度不小于0.03毫米 | 7.5 |
| 7607119072 | ------Other | ------其他 | 7.5 |
| 7607119073 | ------Of a thickness of not less than 0,03 mm | ------厚度不小于0.03毫米 | 7.5 |
| 7607119074 | ------Other | ------其他 | 7.5 |
| 7607119075 | ------Of a thickness of not less than 0.03 mm but less than 0.2 mm | ------厚度不小于0.03 mm但小于0.2 mm | 7.5 |
| 7607119076 | -------For use as body panels in the automotive industry | -------在汽车工业中用作车身面板 | 7.5 |
| 7607119077 | -------Other | -------其他 | 7.5 |
| 7607119078 | ------Other | ------其他 | 7.5 |
| 7607119091 | ------Of a thickness of not less than 0.03 mm but less than 0.2 mm | ------厚度不小于0.03 mm但小于0.2 mm | 7.5 |
| 7607119092 | -------For use as body panels in the automotive industry | -------在汽车工业中用作车身面板 | 7.5 |
| 7607119093 | -------Other | -------其他 | 7.5 |
| 7607119094 | ------Other | ------其他 | 7.5 |
| 7607191011 | -----Consigned from Thailand | -----泰国发货 | 7.5 |
| 7607191019 | -----Other | -----其他 | 7.5 |
| 7616999035 | -----Aluminum plate with: -a length of 36 mm or more but not more than 49 mm, -a width of 29,8 mm or more but not more than 45,2 mm, -a thickness of 0,18 mm or more but not more than 0,66 mm, equipped with a polypropylene tape with: -a length of 6,5 mm or more but not more than 16,5 mm, -a width of 39 mm or more but not more than 56 mm, -characteristic allowing to create solid joint with Pouch external layer by melting process assuring leak and pressure proof sealing of Cell, -resistance to influence of electrolyte, for use in the manufacture of lithium-ion battery cells for motor vehicle batteries | -----铝板，长度为36 mm或以上但不超过49 mm，-宽度为29.8 mm或以上但不超过45.2 mm，-厚度为0.18 mm或以上但不超过0.66 mm，配有聚丙烯胶带，长度为6.5 mm或以上但不超过16.5 mm，-宽度为39 mm或以上但不超过56 mm，-通过熔融过程与袋外层形成牢固连接的特性，确保电池的泄漏和耐压密封，耐电解液的影响，用于制造汽车电池用锂离子电池 | 6 |
| 8104190010 | ---Unwrought magnesium containing 93 % or more but not more than 99,7 % by weight of magnesium | ---未锻造镁，含镁93%或以上，但不超过99.7%（按重量计） | 4 |
| 8104190090 | ---Other | ---其他 | 4 |
| 8108903035 | ---Bars and wires of titanium with a titanium content of 98,8 % or more but not more than 99,9 % of a diameter less than 20 mm | ---钛含量在98.8%或以上但不超过99.9%直径小于20mm的钛棒和钛丝 | 7 |
| 8108903045 | ---Titanium-aluminium-vanadium alloy (TiAl6V4) wire, of a diameter less than 20 mm and complying with AMS standards 4928, 4965 or 4967 | ---钛铝钒合金（tial6v4）丝，直径小于20毫米，符合ams标准4928、4965或4967 | 7 |
| 8301600030 | --Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film | --硅胶或塑料键盘，包括：-普通金属零件，以及-不论是否包括塑料零件，-用玻璃纤维或木材加固的环氧树脂，-不论是否印刷或表面处理，-带或不带导电体-带或不带与键盘相连的膜，-带或不带单层或多层保护膜 | 2.7 |
| 8406820010 | ---Industrial steam turbine with: -an output of 5 MW or more but not more than 40 MW, -designed for a pressure of not more than 140 bar and a temperature of not more than 540 ° C, -equipped with double seat valves on the live steam side which are operated with a hydraulic servo of not more than 12 bar | ---工业汽轮机：输出功率为5 mw或以上，但不超过40 mw，设计压力不超过140 bar，温度不超过540°c，在新蒸汽侧配有双座阀，用不超过12 bar的液压伺服操作 | 2.7 |
| 8406820090 | ---Other | ---其他 | 2.7 |
| 8409910025 | ---Air intake module for engine cylinders consisting of: -a suction pipe, -a pressure sensor, -an electric throttle, -hoses, -brackets, for use in the manufacture of engines of motor vehicles | ---发动机气缸的进气模块包括：吸入管、压力传感器、电子节气门、软管、支架，用于制造汽车发动机 | 2.7 |
| 8409910055 | ---Nozzle body for the regulation of angle and distribution of fuel injection: -of a cylindrical shape, -made of stainless steel, -with 4 or more, but not more than 16 holes, -with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute | ---用于调节喷油角度和分布的喷嘴体：-圆柱形，-由不锈钢制成，-具有4个或更多孔，但不超过16个孔，-流量为100 cm³/min或更多，但不超过500 cm³/min | 2.7 |
| 8409910075 | ---Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with: -an inlet diameter of 2 mm or more, but not more than 10 mm, -an outlet diameter of 2 mm or more, but not more than 10 mm, -an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection, -a plastic covering moulded around a stainless steel tube | ---用于产生电磁场以驱动喷油阀的喷油阀外壳：-进口直径为2 mm或以上，但不超过10 mm，-出口直径为2 mm或以上，但不超过10 mm，-电阻为10ω或以上，但不超过15ω的线圈，它的末端是一个电气连接，-一个模制在不锈钢管周围的塑料覆盖物 | 2.7 |
| 8409910080 | ---Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes, -4 grooves, -a diameter of 3 mm or more, but not more than 6 mm, -a length of 25 mm or more, but not more than 35 mm, -made of stainless steel with hard-chrome plating | ---用于打开和关闭发动机中燃油流的喷嘴针，带有：-2个孔，-4个槽，-直径3 mm或以上，但不超过6 mm，-长度25 mm或以上，但不超过35 mm，-由不锈钢制成，镀硬铬 | 2.7 |
| 8409990025 | ---Hoses assembly for fuel return from injectors to engine fuel unit consisting of at least: - three rubber hoses, whether or not with a protective braided sleeving, - three connectors for connecting fuel injectors, - five metal clamps, - one T-shaped plastic joint, for use in the manufacture of engines of motor vehicles | ---用于从喷油器到发动机燃油单元的燃油回流软管总成，至少包括：-三个橡胶软管，无论是否带有防护编织套管，-三个用于连接喷油器的接头，-五个金属卡箍，-一个t形塑料接头，用于制造汽车发动机 | 2.7 |
| 8413302040 | ---High-pressure plunger pump for direct diesel injection, with: -an operating pressure of not more than 275 MPa, -a camshaft, -a fluid discharging of 15 cm³ per minute or more, but not more than 1 800 cm³ per minute, -an electric pressure regulating valve | ---直接柴油喷射用高压柱塞泵，配有：-工作压力不超过275 mpa，-凸轮轴，-液体排放量不超过15 cm³/min，但不超过1800 cm³/min，-电动压力调节阀 | 1.7 |
| 8413302050 | ---High-pressure plunger pump for direct diesel injection: -with an operating pressure of not more than 275 MPa, -designed to contact the crankshaft, -with an electromagnetic valve | ---用于直接柴油喷射的高压柱塞泵：-工作压力不超过275 mpa，-设计用于接触曲轴，-带有电磁阀 | 1.7 |
| 8413703589 | ----Other | ----其他 | 1.7 |
| 8415900060 | --Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with: -extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm, -a weight of 0,02 kg or more but not more than 0,25 kg | --火焰焊接铝块，用于汽车空调系统中带冷凝器的连接管，带有：-外径为5 mm或以上，但不超过25 mm，重量为0.02 kg或以上，但不超过0.25 kg的铝挤压弯曲连接线 | 2.7 |
| 8415900065 | --Aluminium arc-welded removable receiver dryer, with polyamide and ceramic elements with: -a length of 143 mm or more but not more than 292 mm, -a diameter of 31 mm or more but not more than 99 mm, -with a weight of not less than 0,12 kg and not more than 0,9 kg, -a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, and -a solid particle diameter of not more than 0,06 mm, for use in the manufacture of car air-conditioning systems | --铝弧焊可移动接收器烘干机，带聚酰胺和陶瓷元件，长度为143 mm或以上但不超过292 mm，-直径为31 mm或以上但不超过99 mm，-重量不小于0.12 kg但不超过0.9 kg，-闪光长度不超过0.2 mm，厚度不超过0.06mm和-一种固体颗粒直径不超过0.06mm，用于制造汽车空调系统 | 2.7 |
| 8418999020 | ----Aluminium connecting block for connecting to a condenser manifold in welding process: -hardened to T6 or T5 temper, -with a weight of not more than 150 g, -with a length of 20 mm or more but not more than 150 mm, -with a fixing rail in one piece | ----焊接过程中连接冷凝器歧管的铝连接块：-硬化至t6或t5回火，-重量不超过150 g，-长度不超过20 mm，但不超过150 mm，-带有一个整体式固定轨 | 2.2 |
| 8418999030 | ----Receiver dryer profile for connecting to a condenser manifold in welding process with: -a braze flatness of not more than 0,2 mm, -a weight of 100 g or more but not more than 600 g, -a fixing rail in one piece | ----在焊接过程中连接到冷凝器歧管的接收器-干燥器剖面图：-铜焊平整度不超过0.2 mm，-重量不超过100 g，但不超过600 g，-一个整体固定轨道 | 2.2 |
| 8419908540 | ---Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film | ---硅胶或塑料键盘，包括：-普通金属零件，以及-不论是否包括塑料零件，-用玻璃纤维或木材加固的环氧树脂，-不论是否印刷或表面处理，-带或不带导电体-带或不带与键盘相连的膜，-带或不带单层或多层保护膜 | 1.7 |
| 8479899755 | ----Integrated automated turnkey machinery line for manufacturing jelly rolls of cylindrical lithium ion battery cells by winding, tab assembly and cutting of cathode, separator and anode | ----集成自动化交钥匙机械生产线，用于制造圆柱形锂离子电池芯胶卷，通过缠绕、标签组装和切割阴极、分离器和阳极 | 1.7 |
| 8479899765 | ----Integrated automated turnkey machinery line for the assembly of battery cells to cylindrical lithium ion batteries with a speed of 300 parts per minute and production line | ----集成自动化交钥匙机械生产线，用于将电池芯组装成每分钟300件的圆柱形锂离子电池和生产线 | 1.7 |
| 8479907030 | -----Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film | -----硅胶或塑料键盘，包括：-普通金属零件，以及-不论是否包括塑料零件，-用玻璃纤维或木材加固的环氧树脂，-不论是否印刷或表面处理，-带或不带导电体-带或不带与键盘相连的膜，-带或不带单层或多层保护膜 | 1.7 |
| 8479907040 | -----Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft: -of a circular shape, -made of steel alloy with sintering process, -with not more than 8 oil chambers, -with a Rockwell hardness of 55 or more, -with a density of 6,5 g/cm³, or more, but not more than 6,7 g/cm³ | -----机械装置转子部分的外壳，确保与曲轴相比调整凸轮轴的运动：-圆形，-采用烧结工艺的钢合金制成，-不超过8个油室，-洛氏硬度为55或以上，-密度为6.5 g/cm³或以上，但不超过6.7 g/cm³ | 1.7 |
| 8481309130 | ----Mechanical check (non-return) valve for opening and closing of the flow of fuel: -with an operating pressure of not more than 250 MPa, -with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute, -with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm, -made of steel | ----用于打开和关闭燃料流的机械止回阀：-工作压力不超过250 mpa，-流速为45 cm³/分钟或以上，但不超过55 cm³/分钟，-带有4个输入孔，每个孔的直径为1.2 mm或以上，但不超过1.6 mm，-由钢制成 | 2.2 |
| 8481309930 | ---Brake booster check valve assembly containing at least: -three vulcanized rubber hoses, -one membrane valve, -two metal clamps, -one metal holder, -whether or not connecting metal pipe, for use in the manufacture of motor vehicles | ---制动助力器止回阀总成，至少包括：三根硫化橡胶软管，一个薄膜阀，两个金属夹，一个金属支架，无论是否连接金属管，用于汽车制造 | 2.2 |
| 8481309950 | ---Mechanical check (non-return) valve for opening and closing of the flow of fuel: -with an operating pressure of not more than 250 MPa, -with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute, -with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm, -made of steel | ---用于打开和关闭燃料流的机械止回阀：-工作压力不超过250 mpa，-流速为45 cm³/分钟或以上，但不超过55 cm³/分钟，-带有4个输入孔，每个孔的直径为1.2 mm或以上，但不超过1.6 mm，-由钢制成 | 2.2 |
| 8481805970 | -----Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm | -----钢制流量控制阀，出口孔直径至少为0.05 mm，但不超过0.5 mm，入口孔直径至少为0.1 mm，但不超过1.3 mm | 2.2 |
| 8481900050 | --Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film | --硅胶或塑料键盘，包括：-普通金属零件，以及-不论是否包括塑料零件，-用玻璃纤维或木材加固的环氧树脂，-不论是否印刷或表面处理，-带或不带导电体-带或不带与键盘相连的膜，-带或不带单层或多层保护膜 | 2.2 |
| 8481900060 | --Nozzle body for the regulation of angle and distribution of fuel injection: -of a cylindrical shape, -made of stainless steel, -with 4 or more, but not more than 16 holes, -with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute | --用于调节喷油角度和分布的喷嘴体：-圆柱形，-由不锈钢制成，-具有4个或更多孔，但不超过16个孔，-流量为100 cm³/min或更多，但不超过500 cm³/min | 2.2 |
| 8481900070 | --Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes, -4 grooves, -a diameter of 3 mm or more, but not more than 6 mm, -a length of 25 mm or more, but not more than 35 mm, -made of stainless steel with hard-chrome plating | --用于打开和关闭发动机中燃油流的喷嘴针，带有：-2个孔，-4个槽，-直径3 mm或以上，但不超过6 mm，-长度25 mm或以上，但不超过35 mm，-由不锈钢制成，镀硬铬 | 2.2 |
| 8481900080 | --Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm | --钢制流量控制阀，出口孔直径至少为0.05 mm，但不超过0.5 mm，入口孔直径至少为0.1 mm，但不超过1.3 mm | 2.2 |
| 8483405930 | ----Hydrostatic speed changer: -with a hydro pump and a differential with wheel axle, -whether or not with a fan impeller and/or a pulley, for use in the manufacture of lawn mowers of subheadings 8433 11 and 8433 19 or other mowers of subheading 8433 20 | ----静液压变速器：-带液压泵和带轮轴的差速器，-无论是否带风扇叶轮和/或皮带轮，用于制造第8433 11子目和第8433 19子目的割草机或第8433 20子目的其他割草机 | 3.7 |
| 8501101040 | ---Synchronous hybrid stepper motor with: -an output not exceeding 18 W, -two phases, -a rated current of not more than 2,5 A/phase, -a rated voltage of not more than 20 V, -with or without a threaded shaft, for use in the manufacture of 3D printers | ---同步混合式步进电机，输出功率不超过18w，两相，额定电流不超过2.5a/相，额定电压不超过20v，带或不带螺纹轴，用于制造3d打印机 | 4.7 |
| 8501109964 | -----DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (+/- 0,1), -of a specified temperature range of - 40 °C or more, but not more than + 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion) | -----控制活门角度位置的直流电机，以调节节气门和egr阀中的气流：-具有ip69的入口保护（ip）标准，-未加载时转子转速不超过6500 rpm，-额定电压为12.0 v（+/-0.1），-规定温度范围为-40°c或更高，但不超过+165°c，-带或不带连接小齿轮，-带或不带发动机连接器，-带或不带法兰，-直径不超过40 mm（不包括法兰），-总高度不超过90 mm（从底座到小齿轮） | 2.7 |
| 8501310053 | ----Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller | ----汽车用无刷永久励磁直流电动机，规定转速不超过4100rpm，最小输出功率为400w，但不超过1.3kw（12v），法兰直径为85mm或以上，但不超过200mm，最大长度为335mm，从轴开始到外端测量，-从法兰到外端测量的不超过265 mm的外壳长度，-最多两件式（基本外壳包括至少2个和最多11个钻孔的电气部件和法兰）铝压铸或钢板外壳，无论是否带有密封剂（带o形圈和润滑脂的凹槽），-定子采用单t形齿设计，单线圈绕组为9/6或12/8拓扑结构，以及表面磁铁，无论是否配备电子动力转向控制器 | 2.7 |
| 8501320045 | ----Automotive-ready, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 W, but not more than 1,3 kW (at 12V), -a flange diameter of 85 mm or more, but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), -a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller | ----汽车用无刷永久励磁直流电动机，规定转速不超过4100rpm，最小输出功率为400w，但不超过1.3kw（12v），法兰直径为85mm或以上，但不超过200mm，最大长度为335mm，从轴开始到外端测量，-从法兰到外端测量的不超过265 mm的外壳长度，-最多两件式（基本外壳包括至少2个和最多11个钻孔的电气部件和法兰）铝压铸或钢板外壳，无论是否带有密封剂（带o形圈和润滑脂的凹槽），-定子采用单t形齿设计，单线圈绕组为9/6或12/8拓扑结构，以及表面磁铁，无论是否配备电子动力转向控制器 | 2.7 |
| 8501612090 | ----Other | ----其他 | 2.7 |
| 8502310011 | ----Utility scale wind turbines of an electrical power generation capacity – either in onshore or offshore applications - equal to or in excess of 1.00 megawatt, fitted in a steel wind tower and a nacelle, where the tower is tubular, whether or not tapered, whether or not assembled, whether or not including an embedded tower foundation section, whether or not joined with rotor blades, designed to support the nacelle and rotor blades, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled | ----在陆上或近海应用中的等于或超过1兆瓦的发电能力的实用规模风力涡轮机，安装在钢制风塔和机舱内，其中塔是管状的，无论是否锥形，不论是否装配，是否包括嵌入塔基础部分，无论是否与转子叶片连接，设计用于支撑风舱和转子叶片，当风塔完全组装时，从风塔底部到风舱底部的最小高度为50米 | 2.7 |
| 8502310019 | ----Other | ----其他 | 2.7 |
| 8502310085 | ----Utility scale wind turbines of an electrical power generation capacity – either in onshore or offshore applications - equal to or in excess of 1.00 megawatt, fitted in a steel wind tower and a nacelle, where the tower is tubular, whether or not tapered, whether or not assembled, whether or not including an embedded tower foundation section, whether or not joined with rotor blades, designed to support the nacelle and rotor blades, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled | ----在陆上或近海应用中的等于或超过1兆瓦的发电能力的实用规模风力涡轮机，安装在钢制风塔和机舱内，其中塔是管状的，无论是否锥形，不论是否装配，是否包括嵌入塔基础部分，无论是否与转子叶片连接，设计用于支撑风舱和转子叶片，当风塔完全组装时，从风塔底部到风舱底部的最小高度为50米 | 2.7 |
| 8502310097 | ----Other | ----其他 | 2.7 |
| 8503009943 | ----Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film | ----硅胶或塑料键盘，包括：-普通金属零件，以及-不论是否包括塑料零件，-用玻璃纤维或木材加固的环氧树脂，-不论是否印刷或表面处理，-带或不带导电体-带或不带与键盘相连的膜，-带或不带单层或多层保护膜 | 2.7 |
| 8504901300 | ---Steel laminations and cores, whether or not stacked or wound | ---钢片及钢芯，不论是否堆叠或缠绕 | 0 |
| 8504901700 | ---Other | ---其他 | 0 |
| 8505110073 | ----Articles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with: -a length of 5 mm or more, but not more than 60 mm, -a width of 5 mm or more, but not more than 40 mm, -a thickness of 3 mm or more, but not more than 15 mm | ----铁氧体、钴、钐或其他稀土金属或其合金制成的扁条、拱形条或四分之一套管形状的物品，不论是否用聚合物二次成型，在磁化后用作永久磁铁，其长度为5毫米或以上，但不超过60毫米，宽度为5毫米或以上，但不超过40 mm，-厚度为3 mm或以上，但不超过15 mm | 2.2 |
| 8505199035 | -----Articles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with: -a length of 5 mm or more, but not more than 60 mm, -a width of 5 mm or more, but not more than 40 mm, -a thickness of 3 mm or more, but not more than 15 mm | -----铁氧体、钴、钐或其他稀土金属或其合金制成的扁条、拱形条或四分之一套管形状的物品，不论是否用聚合物二次成型，在磁化后用作永久磁铁，其长度为5毫米或以上，但不超过60毫米，宽度为5毫米或以上，但不超过40 mm，-厚度为3 mm或以上，但不超过15 mm | 2.2 |
| 8507600068 | --Lithium-ion accumulator in a metal housing, with - a length of 65 mm or more, but not more than 225 mm, - a width of 10 mm or more, but not more than 75 mm, - a height of 60 mm or more, but not more than 285 mm, - a nominal voltage of 2,1 V or more, but not more than 3,8 V, and - a nominal capacity of 2,5 Ah or more, but not more than 325 Ah | --金属外壳中的锂离子蓄电池，长度为65 mm或以上，但不超过225 mm，宽度为10 mm或以上，但不超过75 mm，高度为60 mm或以上，但不超过285 mm，标称电压为2.1 v或以上，但不超过3.8 v，标称容量为2.5 ah或以上，但不超过325 ah | 2.7 |
| 8507600077 | --Lithium-ion rechargeable batteries, with: -a length of 700 mm or more, but not more than 2 820 mm, -a width of 935 mm or more, but not more than 1 660 mm, -a height of 85 mm or more, but not more than 700 mm, -a weight of 250 kg or more, but not more than 700 kg, -a power of not more than 175 kWh, -a nominal voltage of 400 V | --锂离子充电电池，具有：-长度为700毫米或以上，但不超过2 820毫米，-宽度为935毫米或以上，但不超过1 660毫米，-高度为85毫米或以上，但不超过700毫米，-重量为250公斤或以上，但不超过700公斤，-功率不超过175千瓦时，-标称电压为400伏 | 2.7 |
| 8515908040 | ---Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film | ---硅胶或塑料键盘，包括：-普通金属零件，以及-不论是否包括塑料零件，-用玻璃纤维或木材加固的环氧树脂，-不论是否印刷或表面处理，-带或不带导电体-带或不带与键盘相连的膜，-带或不带单层或多层保护膜 | 2.7 |
| 8527290010 | ---Satellite radio receiver module: -with a rectangular shape of dimensions 70,5 x 44,9 x 10,5 mm, -comprising of heat sink and a printed circuit board with resistors, capacitors, transistors, coils, diodes and IC, -being able to process radio frequency signals, -with a medium frequency unit, for use in the manufacture of products falling under heading 8527 | ---卫星无线电接收器模块：-尺寸为70.5 x 44.9 x 10.5 mm的矩形，-由散热器和带有电阻器、电容器、晶体管、线圈、二极管和ic的印刷电路板组成，-能够处理射频信号，-带有中频单元，用于制造品目8527下的产品 | 6 |
| 8527290090 | ---Other | ---其他 | 6 |
| 8528590040 | ---Electronic device with LCD touch screen display powered by a voltage of 12 V or more but not more than 14,4 V: - with LCD control processor, - with GPS module, - with Bluetooth module, - with USB port, - with radio signal tuner, - with functions for cooperation with E-CALL, - with connectors, - without integrated control panel, for use in the manufacture of goods of Chapter 87 | ---带有lcd触摸屏显示器的电子设备，电压为12 v或更高，但不超过14.4 v：-带lcd控制处理器，-带gps模块，-带蓝牙模块，-带usb端口，-带无线电信号调谐器，-带与e-call配合的功能，-带连接器，-不带集成控制面板，用于制造第八十七章货物 | 14 |
| 8529906538 | -----Satellite radio receiver module: -with a rectangular shape of dimensions 70,5 x 44,9 x 10,5 mm, -comprising of heat sink and a printed circuit board with resistors, capacitors, transistors, coils, diodes and IC, -being able to process radio frequency signals, -with a medium frequency unit, for use in the manufacture of products falling under heading 8527 | -----卫星无线电接收器模块：-尺寸为70.5 x 44.9 x 10.5 mm的矩形，-由散热器和带有电阻器、电容器、晶体管、线圈、二极管和ic的印刷电路板组成，-能够处理射频信号，-带有中频单元，用于制造品目8527下的产品 | 1.5 |
| 8535900089 | --Other | --其他 | 2.7 |
| 8537109120 | -----Electronic assembly containing: -a microprocessor, -a programmable memory and other electronic components mounted on a printed circuit, -with or without light-emitting diode (LED) or liquid crystal display (LCD) indicators, for use in the manufacture of products of subheadings 8418 21, 8418 29, 8421 12, 8422 11, 8450 11, 8450 12, 8450 19, 8451 21, 8451 29 and 8516 60 | -----电子组件，包括：-微处理器，-安装在印刷电路上的可编程存储器和其他电子元件，-带或不带发光二极管（led）或液晶显示器（lcd）指示器，用于制造第8418 21、8418 29、8421 12、8422 11、8450 11、8450 12、8450 19子目的产品，8451 21、8451 29和8516 60 | 2.1 |
| 8537109173 | -----Multifunctional device (so-called “combine instrument”) with: - curved TFT-LCD display (radius 750 mm) with contact-sensitive surfaces, - microprocessors and memory chips, - acoustic module and loudspeaker, - connections for CAN, 3 x LIN bus, LVDS and Ethernet, - for operating various functions (e.g. chassis, lighting) and - for situation-related display of vehicle and navigation data (e.g. speed, odometer, charge level of the drive battery), for use in the manufacture of passenger cars powered solely by an electric motor covered by HS subheading 8703 80 | -----多功能设备（所谓的“组合仪表”），具有：-带接触敏感表面的曲面tft-lcd显示器（半径750 mm），-微处理器和存储芯片，-声学模块和扬声器，-用于can、3 x lin总线、lvds和以太网的连接，-用于操作各种功能（如底盘，照明）和-用于车辆和导航数据（例如速度、里程表、驱动电池的充电水平）的情况相关显示，用于制造仅由hs第8703子目80所涵盖的电动机驱动的乘用车 | 2.1 |
| 8537109855 | -----Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film | -----硅胶或塑料键盘，包括：-普通金属零件，以及-不论是否包括塑料零件，-用玻璃纤维或木材加固的环氧树脂，-不论是否印刷或表面处理，-带或不带导电体-带或不带与键盘相连的膜，-带或不带单层或多层保护膜 | 2.1 |
| 8538909970 | -----Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film | -----硅胶或塑料键盘，包括：-普通金属零件，以及-不论是否包括塑料零件，-用玻璃纤维或木材加固的环氧树脂，-不论是否印刷或表面处理，-带或不带导电体-带或不带与键盘相连的膜，-带或不带单层或多层保护膜 | 1.7 |
| 8544300045 | ---Linking seven-core cable for connecting sensor for pressure measure in intake manifold (Boost Pressure Sensor - BPS) and sockets for glow plugs with common connector, containing four sockets and two connectors for use in the manufacture of compression-ignition internal combustion piston engines for passenger car | ---连接进气歧管中压力测量传感器（增压压力传感器-bps）的七芯电缆和带有公共接头的电热塞插座，包括四个插座和两个接头，用于制造轿车用压燃式内燃机活塞 | 3.7 |
| 8544300055 | ---Connecting five-core cable with connectors for coupling the temperature sensor and the exhaust manifold pressure difference sensor to the common connector for use in the manufacture of compression-ignition internal combustion piston engines of passenger cars | ---将带有连接器的五芯电缆连接到通用连接器上，用于将温度传感器和排气歧管压差传感器连接到客车压燃式内燃机的制造中 | 3.7 |
| 8544700010 | --Single mode optical fibre cables, made up of one or more individually sheathed fibres, with protective casing, whether or not containing electric conductors; excluding cables in which all the optical fibres are individually fitted with operational connectors at one or both extremities and plastic insulated cables for submarine use containing a copper or aluminium conductor in which fibres are contained in metal module(s) | --单模光缆，由一根或多根单独护套的光纤组成，带保护壳，不论是否含导电体；不包括所有光纤在一端或两端分别装有操作连接器的电缆，以及含有铜或铝导体的海底用塑料绝缘电缆，其中光纤包含在金属模块中 | 0 |
| 8544700090 | --Other | --其他 | 0 |
| 8545909040 | ---Corrosion resistant, layered technical fibre substrate of a gas diffuser layer with: -controlled fibre length, flex strength, porosity, thermal conductance, electrical resistance, -a thickness of less than 600 µm, -a weight of less than 500 g/m² | ---气体扩散器层的耐腐蚀、分层技术纤维基底，具有：-受控纤维长度、弯曲强度、孔隙率、热导率、电阻，-厚度小于600µm，-重量小于500 g/m² | 2.7 |
| 8708402070 | ---Manual gearbox in cast aluminium housing with: -a width of not more than 480 mm, -a height of not more than 400 mm, -a length of not more than 550 mm, -five gears, -a differential gear, -an engine torque of 250 Nm or less, -for transverse installation, for use in the manufacture of motor vehicles of heading 8703 | ---铸铝外壳的手动变速箱，带：-宽度不超过480 mm，-高度不超过400 mm，-长度不超过550 mm，-五个齿轮，-一个差速器齿轮，-发动机扭矩不超过250 nm，-用于横向安装，用于制造品目8703的机动车 | 3 |
| 8708405060 | ----Manual gearbox in cast aluminium housing with: -a width of not more than 480 mm, -a height of not more than 400 mm, -a length of not more than 550 mm, -five gears, -a differential gear, -an engine torque of 250 Nm or less, -for transverse installation, for use in the manufacture of motor vehicles of heading 8703 | ----铸铝外壳的手动变速箱，带：-宽度不超过480 mm，-高度不超过400 mm，-长度不超过550 mm，-五个齿轮，-一个差速器齿轮，-发动机扭矩不超过250 nm，-用于横向安装，用于制造品目8703的机动车 | 4.5 |
| 8708502015 | ---Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened | ---球形外侧等速万向节球轴承保持架，车辆驱动系统的一部分，由碳含量为0.14%或以上但不超过0.57%的渗碳材料制成，锻造、车削、冲孔、铣削和硬化 | 3 |
| 8708502025 | ---Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened | ---球型外侧等速万向节壳体，用于将扭矩从发动机和变速器传递到机动车辆的车轮上，呈外座圈的形式，带有6个或6个以上但不超过8个球道，带有螺纹，带有21个或21个以上但不超过38个齿的外渐开线花键，用于与制造的轴承球一起运转含碳量为0.48%或以上但不超过0.57%的钢-锻造、车削、铣削和硬化 | 3 |
| 8708502035 | ---Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened | ---内侧等速万向节三脚架外壳，带：-外径67.0 mm或以上但不超过99.0 mm，-3个直径29.95 mm或以上但不超过49.2 mm的冷校准滚道，-一个21齿或以上但不超过41齿的外花键，-锻造、车削、轧制和硬化 | 3 |
| 8708502045 | ---Outboard constant velocity joint inner race, part of the vehicle's drive system, with: -6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm, -forged, turned, milled, broached and hardened | ---外侧等速万向节内座圈，车辆驱动系统的一部分，具有：-6个或更多但不超过8个球道，适用于轴承直径为12.0 mm或更多但不超过24.0 mm的球，锻造、车削、铣削、拉刀和硬化 | 3 |
| 8708502055 | ---Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened | ---内侧等速万向节三脚架，车辆驱动系统的一部分，带有：-3个直径为17128 mm或以上但不超过25468 mm的耳轴，-锻造、车削、拉刀和硬化 | 3 |
| 8708505550 | -----Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened | -----球形外侧等速万向节球轴承保持架，车辆驱动系统的一部分，由碳含量为0.14%或以上但不超过0.57%的渗碳材料制成，锻造、车削、冲孔、铣削和硬化 | 4.5 |
| 8708509945 | ------Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened | ------球型外侧等速万向节壳体，用于将扭矩从发动机和变速器传递到机动车辆的车轮上，呈外座圈的形式，带有6个或6个以上但不超过8个球道，带有螺纹，带有21个或21个以上但不超过38个齿的外渐开线花键，用于与制造的轴承球一起运转含碳量为0.48%或以上但不超过0.57%的钢-锻造、车削、铣削和硬化 | 3.5 |
| 8708509950 | ------Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened | ------内侧等速万向节三脚架外壳，带：-外径67.0 mm或以上但不超过99.0 mm，-3个直径29.95 mm或以上但不超过49.2 mm的冷校准滚道，-一个21齿或以上但不超过41齿的外花键，-锻造、车削、轧制和硬化 | 3.5 |
| 8708509955 | ------Outboard constant velocity joint inner race, part of the vehicle's drive system, with: -6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm, -forged, turned, milled, broached and hardened | ------外侧等速万向节内座圈，车辆驱动系统的一部分，具有：-6个或更多但不超过8个球道，适用于轴承直径为12.0 mm或更多但不超过24.0 mm的球，锻造、车削、铣削、拉刀和硬化 | 3.5 |
| 8708509960 | ------Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened | ------内侧等速万向节三脚架，车辆驱动系统的一部分，带有：-3个直径为17128 mm或以上但不超过25468 mm的耳轴，-锻造、车削、拉刀和硬化 | 3.5 |
| 8708809930 | -----Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles: -with a chrome coating, -of a diameter of 11 mm or more, but not more than 28 mm, -of a length of 80 mm or more, but not more than 600 mm, with a threaded end or a mandrel for resistance welding | -----汽车液压或油气减震器用表面硬化的钢活塞杆：-镀铬，-直径为11 mm或以上，但不超过28 mm，-长度为80 mm或以上，但不超过600 mm，带有螺纹端或电阻焊芯轴 | 3.5 |
| 8708913520 | -----Turbocharger cooling duct containing: -an aluminum alloy duct with at least one metal holder and at least two mounting holes, -a rubber pipe with clips, -a stainless steel flange highly resistant to corrosion [SUS430JIL], for use in the manufacture of compression ignition engines of motor vehicles | -----涡轮增压器冷却管包含：-一个铝合金管，至少有一个金属支架和两个安装孔，-一个带夹子的橡胶管，-一个高度耐腐蚀的不锈钢法兰[sus430jil]，用于制造汽车压燃式发动机 | 4.5 |
| 8708931040 | ----Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for: - cruise control reset, - electronic parking brake release, -start and stop engine management under Idle Stop and Go system (ISG), for use in the manufacture of passenger vehicles | ----带电子驻车制动连接（epb）的离合器踏板，不论是否具有以下发送信号功能：-巡航控制复位，-电子驻车制动释放，-怠速停转系统（isg）下的启动和停止发动机管理，用于制造乘用车 | 3 |
| 8708939040 | ----Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for: - cruise control reset, - electronic parking brake release, -start and stop engine management under Idle Stop and Go system (ISG), for use in the manufacture of passenger vehicles | ----带电子驻车制动连接（epb）的离合器踏板，不论是否具有以下发送信号功能：-巡航控制复位，-电子驻车制动释放，-怠速停转系统（isg）下的启动和停止发动机管理，用于制造乘用车 | 4.5 |
| 8708991055 | ----Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film | ----硅胶或塑料键盘，包括：-普通金属零件，以及-不论是否包括塑料零件，-用玻璃纤维或木材加固的环氧树脂，-不论是否印刷或表面处理，-带或不带导电体-带或不带与键盘相连的膜，-带或不带单层或多层保护膜 | 3 |
| 8708999718 | -----Hydrostatic speed changer: -with a hydro pump and a differential with wheel axle, -whether or not with a fan impeller and/or a pulley, for use in the manufacture of tractors of subheadings 8701 91 90 and 8701 92 90, whose main function is that of a lawn mower | -----静液压变速器：-带液压泵和带轮轴的差速器，-不论是否带风扇叶轮和/或皮带轮，用于制造第8701 91 90和8701 92 90子目拖拉机，其主要功能是割草机 | 3.5 |
| 8708999722 | -----Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film | -----硅胶或塑料键盘，包括：-普通金属零件，以及-不论是否包括塑料零件，-用玻璃纤维或木材加固的环氧树脂，-不论是否印刷或表面处理，-带或不带导电体-带或不带与键盘相连的膜，-带或不带单层或多层保护膜 | 3.5 |
| 8714109070 | ---Motor bikes radiators in consignment of 100 pieces or more | ---摩托车散热器托运100件以上 | 3.7 |
| 8802400011 | ----of an unladen weight exceeding 15|000|kg but not exceeding 38|000|kg | ----空载重量超过15 000公斤但不超过38 000公斤 | 2.7 |
| 8802400013 | ----of an unladen weight exceeding 38|000|kg but not exceeding 100|000|kg | ----空载重量超过38 | 000 | kg但不超过100 | 000 | kg | 2.7 |
| 8802400015 | ----of an unladen weight exceeding 100|000|kg but not exceeding 124|000|kg | ----空载重量超过100 | 000 | kg但不超过124 | 000 | kg | 2.7 |
| 8802400017 | ----of an unladen weight exceeding 124|000|kg but not exceeding 132|000|kg | ----空载重量超过124 | 000 | kg但不超过132 | 000 | kg | 2.7 |
| 8802400019 | ----of an unladen weight exceeding 132|000|kg but not exceeding 140|000|kg | ----空载重量超过132 | 000 | kg但不超过140 | 000 | kg | 2.7 |
| 8802400021 | ----of an unladen weight exceeding 140|000|kg | ----空车重量超过140000公斤 | 2.7 |
| 8802400029 | ---Other | ---其他 | 2.7 |
| 9002110023 | ---Lenses with: -motorized focus, zoom, aperture, -electronically switchable infrared cut filter, -an adjustable focal length not less than 2,7 mm and not more than 55 mm, -a weight of not more than 100 g, -a length of less than 70 mm, -a diameter of not more than 60 mm | ---配：-电动聚焦、变焦、光圈，-电子可切换红外截止滤光片，-可调节焦距不小于2.7 mm且不大于55 mm，-重量不大于100 g，-长度小于70 mm，-直径不大于60 mm | 6.7 |
| 9019201000 | --Mechanical ventilation apparatus, capable of providing invasive ventilation | --能够提供有创通气的机械通气装置 | 0 |
| 9019202000 | --Mechanical ventilation apparatus, non-invasive | --无创机械通气装置 | 0 |
| 9019209000 | --Other, including parts and accessories | --其他，包括零件、附件 | 0 |
| 9020001010 | --For use in civil aircraft | --用于民用航空器 | 0 |
| 9020001090 | --Other | --其他 | 1.7 |
| 9020009011 | --Breathing appliances (excluding parts thereof), for use in civil aircraft | --民用航空器用呼吸装置（不包括其部件） | 0 |
| 9020009091 | ---Parts of respiratory apparatus and of gas masks, for use in certain types of aircraft | ---某些类型飞机用呼吸装置和防毒面具零件 | 0 |
| 9020009099 | ---Other | ---其他 | 1.7 |
| 9029203140 | ----Clustered instrument panel with: — stepping motors, — analog pointers and dials, — or without microprocessor control board, — or without LED indicators or LCD display, — showing at least: — speed, — engine revolutions, — engine temperature, — the fuel level, — communicating via CAN-BUS and/or K-LINE protocols, for use in the manufacture of goods of Chapter 87 | ----群集仪表板带有：-步进电机，-模拟指针和刻度盘，-或不带微处理器控制板，-或不带led指示灯或lcd显示屏，-至少显示：-转速，-发动机转速，-发动机温度，-燃油油位，-通过can总线和/或k线协议进行通信，用于制造第87章的货物 | 2.6 |
| 9029900040 | --Clustered instrument panel with: — stepping motors, — analog pointers and dials, — or without microprocessor control board, — or without LED indicators or LCD display, — showing at least: — speed, — engine revolutions, — engine temperature, — the fuel level, — communicating via CAN-BUS and/or K-LINE protocols, for use in the manufacture of goods of Chapter 87 | --群集仪表板带有：-步进电机，-模拟指针和刻度盘，-或不带微处理器控制板，-或不带led指示灯或lcd显示屏，-至少显示：-转速，-发动机转速，-发动机温度，-燃油油位，-通过can总线和/或k线协议进行通信，用于制造第87章的货物 | 2.2 |